Search results

Hi, could possibly the locking cam on it, depends which bits you've soaked already. Have a look on this one - www.discovery2.co.uk / Rear "Dickie" Seats - Stuck

Fitted one of these light bars to my 2001 Discovery TD5 a few weeks ago. Very easy to fit. The RAVE pages stated you have to take the bumper off but I managed it without doing this. If you take the front grill out there was just enough room to get my fingers in for the bolt. I think it took 2 x...

Here you go, he's running it until the 6th March, looking forward to getting mine....:) http://www.landyzone.co.uk/lz/f16/interest-group-buy-bbs-solution-nanocom-units-277319.html

Theres some good info on this site as well if you fancy a bit of DIY ;) www.discovery2.co.uk Breathers

PM Sent

Recently did mine using the below idea thanks to Sierrafery. Just took my time doing one at a time so as not to muddle them up :)

Really like this........gives me more motivation to get on with mine :) :)

After some thoughts/advice with this one please...... Finished a journey and found that my headlights were on - I hadn't used them on the journey, only the indicators. The tail/position lamps etc were all off. I locked/unlocked the car several times, tried the light switch but all to no avail...

Hi, Have a look at the below thread that was posted a few days ago. Theres a good post in there that describes a fix which may assist you. :) http://www.landyzone.co.uk/lz/f8/leaky-gutter-around-top-windscreen-274130.html

Seems sensible to me, I'll replace them all, thanks guys ;) Fareham, Hampshire, right on the not so sunny south coast :lol: Steve

Changed mine two weekends ago after seeing the above recommendation on another thread - has made a big difference and very smooth now :)

Yes have had a look and think they are certainly going to need doing... when you did the arm to axle did you replace the 2 arm to chassis at the same time? Don't want to create extra work but if the arms are coming off anyhow, just figured it would be worthwhile. Hence the reasoning of seeing...

Hello, Have had an advisory for front Radius Arm bushes on the MoT and want to get them sorted. Figure it will help "tighten" the feel of the front end a bit. I know there are lists of posts on here around Poly-bush etc and in particular not recommending the cotton reel shaped bushes...

Hi, Yes thats sort of what I was thinking.... I always wait for the coil glow light to go out even if the engine is hot/cold - when cold always fires first time. When warm it cranks a couple of times before firing. Like the idea of diagnostics though, an additional piece of kit is always a...

Sounds like a plan! Could be quite timely too as just seen the Nanocom Evolution is currently 20% off until 31st December - Might have to be a Christmas treat for myself:) Being a complete Novice with this - I take it this would help me out and save me £100 each time i get a dealer to plug...

Hi All, So it took me 4 weeks to get round to it but eventually braved it yesterday. Took me best part of the day but all injector seals/washers replaced along with a new injector harness..... Got to be honest was very satisfying when all put back together, fuel system purged and she started ;)...

Hi Guys, Thats settled then - Genuine parts it is! ;) Many thanks for your advice - I shall prepare my shopping list and include the ERR7266 I've been reading up on the Injectors as figured theres enough info about to at least have a go at it. A number of the write ups make reference to an...

Good Afternoon All, Just after some general thoughts/advice re my 2001 Discovery TD5. I like working on the vehicle myself but am by no means a “mechanic”! What I can and have previously done (following some great threads on here) is - Own Service (Oils/filters etc) Renewed Discs and...

Yes indeed ;) A clear case of me not being able to see exactly what was in front of me!! New one fitted and started first time. Thank you very much for your assistance (and patience!) :)

Hi There, just done that and have the following - Battery 12.26V Ignition on 11.56V Turn to start (Cranks) it drops to 3.4V