Search results

Hi RR td6_2003 brixham Devon Hi I was driving home and for no reason all lights went out eas but car was still up at ride height On dash says air suspension in active had code reset you could hear compressor working but not raising RR so I bought the wabco kit off of eBay fitted that lights...

ok thanks for that

hi all just an update I did a leak off test and test showed that injector one {closest to front of rr } was very faulty leak off was like a water fountain which im glad as easiest to get at just wondering if I buy a recon injector does it have to be recoded and calibrated to work or is it a...

Hi just an update solved hot start issue by changing rail fuel pressure sensor fidily but done now Plus installed air compressor service kit really easy to do solved issue with eas cutting out due to compressor over heating

Rr 2003 l322 td6 Hi just wondering looks straight forward how easy is it to remove inlet manifold as looks fiddily need to change fuel pressure sensor on rail Plus has anyone used a air compressor service kit off of eBay how easy to do looks straight forward but have been caught out in past

regarding hot start issue turned out to be fuel pressure sensor and fuel temp sensor how do you research 62, etc etc

Regarding injectors can u replace with reconditioned ones as a straight swap or do they have to be coded to work

Went back to basics Checked battery voltage with nothing on or running 12.18 volt or 50% charged Checked while running everything on lights seats heater 14.40 volt How do I check glow plugs take out and put across 12 v supply

Hi I had hot start issue solved it by replacing lp pump Now struggles to start from cold as well as hot Once started drives fine no smoke no loss in power Wood it be faulty injector/s or the pressure sensor on rail If I get recon injectors do they have to be re coded to work How do I do a leak...

That's what popped back up

An update Fault codes. Are x9 13573 glow duration unit faulty 1028 exhaust gas recirculate actuator 5651 smooth running control 1152 cooler fan control open circuit Rail pressure monitoring not ok 2550 rail pressure on engine start not ok 7728 pressure sensor boost press deviation Abs front...

How easy is it to remove camshaft sensor

Has anyone had parts from here

All ok Crank sensor wasn't fully home after having a better look Now runs fine drives fine Only problem still got hot start issue lol Got a brand new lp pump from LANDROVER so will fit that see if it solves If not going to plugged in at specialist £100+ vat I will update with codes and faults...

What rough cost of all that Becoming bottomless pit of problems at min Joys of range rover

Ranger rover vogue 2003 td6 3 litre 107k Rr was running and starting ok Only problem had hot start issue So was told to change crank sensor So I did car wood start but wouldn't rev above 1500rpm before getting really lumpy or cutting out But wood restart straight away And do same After that I...

Touch throttle cuts out at 2k rpm

What I'm thinking cheers amyway

Changed sensor rr wouldn't start and when it did ran rough when reved to 2k rpm cut out Thought dodgy sensor so have put old one back in Went to change crank sensor one on back of engine No idea what it is Before I touched it was running fine just had hot start issue Now starts up after a...