Search results

yeah its just i haven't removed the swivel housing yet but i suppose its only another 10 mins work to get it off

i noticed grease had been sprayed on the inside of one of my front wheels. i took the hub off to find the grease in there had lost its viscosity. it was like water. the bearings are fine and all the seals look good, not perished or split. my question is do i need to replace these seals including...

they offered me £50 for a 1982 porsche 924

Get the driving flange off, undo the locking tab (make sure you have a new one unless you're a yorkshireman, then just pound it flat and reuse it). :hysterically_laughi fair one. i have done that

i have a 90 and used a sankey to move hay around i also moved a 1000l ibc of water around on it. i sold the livery yard so if you want to buy the trailer pm me

on the back of the alternator you have 3 connections the main one witch should throw out over 14v then a smaller one with a w next to it i think which is for a rev counter and then one with a d+ which is the light one so make sure all is well with that but 12v is low.do you need a 100amp...

my 19j used to fire up like a london smog after 30 seconds of cranking. when we had the snow there was a big oil slick next to where the exhaust pipe was. put a 200tdi in now which gives the normal puff of smoke on start up nothing to worry about there

i too was serving when the wolf came into service and they did say dont move it but squaddies are idiots and drive like they stole it cross country and jump up and down on it. my current 90 has the wheel on the bonnet and it saves in gym membership as i have to bench press the wheel and bonnet...

good luck keep us informed. i will be starting my 2.5td out and 200tdi in project in a couple of weeks, i know its not as complicated as your task but never having done it before i'm looking forward to it

i have decided that it is time to replace my 2.5td 19 j with a 200tdi as it has started using a lot of oil and is a bit of a bugger to wake up on a cold morning. of course i will be keeping an eye on our favorite internet auction site and autotrader but if anyone knows of a decent unit going...

i have a spare wheel on my bonnet so the release cable does jack all. i just put my hand into a small hole in my front grill and move the lever to relase

adventure 4x4 are really good, dont know about the gildersome one didn't know it was there. will probably take a look this week as only 10mins from home

i changed one last year on a disco 300tdi and the earth went to one of those i just don't remember which one

it goes on one of those nuts at the top of it. i think the top one but i don't have a tdi anymore so i cant check which one but it is one of them

i'm near tong if you need a hand, and i can weld. and there's the other guys on here so no need to panic

is this how you bought it or have you done this to it

i'm in bradford pm me and we can take a look, the fog light will likely be an earth or a loose bulb and exhausts can be repaired in some cases cheaply if your skint and put a new one on when you can afford

i got one of these Land rover Defender series 3 center Dash Console | eBay

i used the snow and ice ones in canada, they were very good, i have normal scorpions on my 90 at the moment which are good tyres even in muddy fields....GO BEARS

insulate battery box with polystyrene