Search results

Cheers guys, useful start point. Will have a look when I've sorted all the flack from mothers day TH

Well now the SRS is sorted out, now have another issue. On the way back from north Yorkshire the other weekend, the old girld decided it was a good idea to start wandering. Appears that it only happens on the inside lane of the motorway or where there is an odd change in the camber of the road...

There is a connector under the steering column, connected to one of the yellow sleeved cables!!!!!!!!!!!!!!!! not an OBD!!!!!! Why should I not be surprised Best regards now all to fix is the wandering steering!!!!!!!! see new post Tinhat

Well I found a local chap at Bennington Land Rover. Very patient with me and an old Disco, he checked with his diagnostic tool supplier and confirmed he had the correct cable and software. Confirmed the SRS had an 'Open Circuit' sensor error code. Reset the SRS, tested it a few times...

Cheers guys thanks for the advice , much appreciated. TH

Oh dear what a nightmare. Ive just been looking at the wiring on mine. Not sure why but the crimps seem to be very poor, a couple in the plugs just to the left of the drivers footwell have pull out or broken on mine!!!. If you have a idea where they fiddle have a good look at the wiring, it may...

I have recently done some serious milage in North Yorkshire and the pads and discs on the front are showing signs of a need to replaced. and in any case the Mot is in June I note from Haynes that solid or ventilated discs are fitted. But it does not advise if there are thickness difference or...

Thanks Dr Evil, Know anyone/independent in North Herts with a Hawkeye and Disco 1 (as in '95) sotware (I checked the web site) bit much at £300 for one use? I'd hate to have to use the main steelers! Best regards TH

~Thanks Discool I have confirmed that its a 95 disco (vin prefix is MA) so I appear to have been wasting my time looking for the OBD connector. So what kit is necessary to reset the SRS. is there another bit of Landy Only kit that connects direct to the SRS unit? Any help would be appreciated...

HELP Well the SRS light is still flashing. Found someone who says he can reset it, but we can't seem to find the connector!!!! Also its not too clear what shape colour etc the connector is supposed to be. Its a 1995 Disco 1 2.5 litre Deisel in ES form. We found a spare plug under the passenger...

Discool thanks for the update. I'll wait till the suns up again and take a photo. I think it must be a multipoint as there are two sensors , one either side of the raditor. Also the warning on the SRS box states, do not drop so I presume there is another 'sensor' in that. Seems very stupid to...

Discool thanks for the prompt reply. I don't think I dropped it, but it was dark. Why such hassle with SRS reset!!!!! Is there any way I could use a laptop and interface lead. Doe anyone make one? So LR re again into special tools etc. Do you think I could take it all out and get away with...

Hello guys, hope someone can help I recently changed the battery on my Disco 1, wanted to fit the heavy duty one rather than the light weight version. In the course of this I discovered that there was 9what I thought was a relay screwed to the battery carrier platform. I unscrewed this and...

Further information on Diagnostics Removed the wiper motor. Checked that it works ok on a seperate battery supply. Appears to be fully finctional when the moter is energise (two pin connector) Removed the plastic cover over the gear mechanism. I;ve had wiper motors with corroded copper in the...

Thanks guys, have not checked it 'in motion' I'll have to give it a go. The door switches all appear to work, the alarm/imobilser sulks if one is open. the interior lights all work and switch with the relevant doors. so I presume all the switches are OK. any other advice would be greatly...

Hi guys and Gals, Ftrying to get my rear wiper on a Disco M reg (94) to work. Originally the wiring from the switch had been cut and the supply used to feed a CB radio!. I managed to sort this and have reconnected the wiring to the switch and reconnected the switch. I still had rear washers but...

Thanks guys. I'll have a look for a doughnut tonight and see if I can get a view of the bearing/joint. Will let you know the outsome TH

Bit of advice please guys, Had trouble disengaing the diflock a couple of weeks ago. But managed it in the end. 250 yards in reverse I now appear to have an odd 'clunk/Thud' at the rear end when not being smooth with the gearchange!! also if I select reverse and don't soft shoe the clutch...

Just fitted a new lift pump to my M reg 300tdi. New pump came with two straight pipes. Evidently this is standard, some pumps come with the two nuts and olives, some don't. So have a close look at the old one, you should have two nuts , one on each pipe, if you look inside the open end of the...

Matty Daak Sounds terribley expensive. Good luck. Not had much experience of Disco's transmission yet.I'm sure I'll get my share. I think its probably worth while to have a close look and a bang about before getting terribly worried about diffs etc. Although it may be I'd suggest its more likely...