Search results

good day all.....i changed the fuel filter in the engine bay today but somehow the problem has gotten slightly worse. i've included two videos....mind you the idle was not dropped by me.thanks in advance.

this is what i found when i removed the sedimenter to clean.......all goes well i hope cleaning the sedimenter solved the problem...tomorrow i will change the fuel filter as i was a bit busy today.will keep you updated

Lift pump is good to my knowledge....I am however planning to take down the sedimenter and clean tomorrow as well as change the filter. This all started happening after a 45 degree......6km climb up a hill....will keep you posted on my progress

Hi all....it's been a while I haven't posted here but I have a bit of a problem.....two days ago I've been having an intermittent problem with my 300tdi discovery 1...automatic. While driving the engine feels as though it is going to cut out similar to what an empty diesel tank would give....the...

Ok thanks.....if you know of any guides showing how they did it....that would be appreciated....thanks much

Is this the same t-piece that the rear brakes use?

Good day all....I recently converted my front brakes on my 1996 300tdi(Turner engineering unit) discovery....however I have noticed that the calipers are for a dual brake line system whereas mine is a single line system. And as it is now only two of the four pistons in the caliper are...

Good day everyone, fitted a new waxstat adapter and sealing o-ring....noticed today some oily residue where the o-ring sits....is this normal or do I have to change the seal once more

Ok thanks Mr Martin....once again you've been much help to me....I don't know if u remember as u comment on much of the topics here...I had a 300tdi that kept overheating....I bought a 300tdi turner unit....but this has been the only issue since....thanks again Mr Martin

Well if that's case good....but if it doesn't would the gasket paper and silicone work? I ordered an original adapter....but not sure if the seal would come with it....also....is it possible to get the dimensions of the seal as I have both the lower and upper gasket rebuild kits but can't seem...

Well......the o-ring is hard to obtain where I live and trying to use one from a kit has cost me two adapters already....so I was wondering if it was possible to simply make a gasket to replace the seal

Hey all....question about the waxstat adapter on the 300tdi...is it feasible to use silicone sealant or fashion a gasket in place of the standard o-ring

I'm guessing....but asking at the same time....lol....

Etc 6375 is the clip that holds the fuel rail to the injectors the one I'm looking for holds the injector harness multiplug unto the injectors

Good day everyone while reassembling my 3.9v8 I noticed that my injector harness is missing the clips that hold the harness to the injectors....does anyone know the part number of that clip?

I suspect faulty wiring/switch is it a simple fix?

Hey everyone....so I have a 300tdi automatic discovery 1 and recently when I am driving through water a light keeps glowing but when it's dry it stays off...I've never seen this light before though....any advice is appreciated...and right now it's the height of the rainy season in trinidad where...

Hey good day everyone, my name is Michael Spann from Trinidad(the Caribbean)...have been a member of the forum for a little while now havr just gotten time to say hello to everyone. I currently own a 1996 discovery 1 300tdi auto with a rebuilt engine from turner engineering. My family is land...

Got mine sorted yesterday...adjusted the throttle cable down to reduce idle

Auto....but mine has no computer