Search results

Nearly there got the winch running and some bodywork done rear axle not leaking anymore. My dads has his eye on a another landy for about 6 months same sort of story 10 years parked on a muck heap and our persistence paid off his wife said we could finally buy it, so we now have a series 3...

20 50 mineral oil from asda cheap and chearfull a machanic we know swears by the stuff in older cars espicailly old landys £13ish for 5 litres just done mine and the stuf that came out looked nuclear (20 years of crap)

Got the roof on now and all lined up with a little bit of wigglin, having a bit of diffuculty getting the wiper motor off, the bible says undo it all and pull out complete with cable but dosent want to give it up. Did an oil change and the engine sounds really nice now a few noisy tappets...

yeah i used this method works really well cheers

Got most of the bulkhead painted in primer now,if it warms up today will start on final coats. then its all oils, diff gaskets sump gasket and should be pretty much there. untill the next load of leaks appear anyway.

Yeah it works needs a new cable and some oil; but it works

Some of the pics all the good ones dont work

Well some progress been working away in crappy london so not had much time for the landy but finally finished the bulkhead, No more holes and i can hang doors. hopefully get a day off next week to paint it and start putting it all back together, then just waiting for v5 as dvla had it down as a...

1969 2a All standard just new gaskets everywhere, stripped, cleaned, and put back together....nearly done

messing around with suspension, not a lot of travel with leaf springs.not bad for something made in 1969 though

Well a few more bits done waiting for one more part to arrive then the bulkhead finnally gets done. Had to move some soil and the wheel barrow was taking to long and tractor out of action so another job for the landy now with all tow bar and electrics finished. Did the job great heavy load and...

yeah i need to rethink my tow bar and get a drop plate as every trailer i put behind it is to high at the front, this the highest trailer i have and still dosent sit flat. Savaing up for parabolicss so will soon be higher again.

yeah will be using it for snatching etc so i used 5mm that i had and made a plate to fill square gap in rear cross member should be solid cheers for the advice

ideal cheers for the help can stick it back togehther now Cheers

Got a tow bar came off before rear chassis swap, now i cant work out how to put back on. Have fitted with the two round bits on top bolts (between chassis and tow bar plate) but then bottom not sitting parralel with the chassis with a plate either side of chassis on bottom bolts. Does it have...

Hi had same issue it was leaning to the drivers side, all my springs had collapsed so found a used set from a mate stripped and rebuilt them refitted and it solved the problem, i thought. took it out in the field then parked up again and the lean came back, from what ive read it should lean to...

Bit of progress figured out the clutch pedal leak was a well and trully knackered master cylinder so replaced seals and is good as new, gear changes have become a lot smoother. Got the rear of the cab on and sealed, doors are on now waiting for bottom door repair so i can chop up the bulkhead...

cheers, not going to worry about fitting them, don"t think its a big issue running without.ceers oli

hi using belts as check straps on a 2a does any one know the correct lengths for these? Also i think one might be longer than the other so is left or right side the short one. Any help would be great cheers oli

landy earning its keep when the wheelbarrow has a flat tyre bit of off roading at the weekend has accses to a massive area of woods so took some toys, went in a bit keen and got the county stuck in the first river crossing but was a rite laugh. 110cc hybrid mini quad is pretty deadly down...