Search results

yes i agree but difficult to find the motor

no , i ordered only the regulator because the motor was going, i didn't knew about the hall effect sensor

very hard to find only the motor, does some one has a spare one? thanks

Nodge; the window doesnt drop, andy. no i havent change the motor, the wiring must be ok because the window goes up and down all the way with switch- key- or doorhandle, only by 2cm each time, ok for the sensor story, ill try to find an other motor, thanks

if you mean , i connected the batterie and the window dropped 2 cm thats all

bonjour i changed the whole mechanism and no difference with the old one, when i open the door it goes down 2cm when i close- nothing and manuel cm per cm and no wiper, i check the window motor its ok- so i have a problem- fuses are ok but no volts on the washer or wiper buttons,

i ordered a new trunck window winding mechanism, its comming next thursday , thanks amazon

ok thanks i will order the regulator and changed it,

yes i did and nothing broken and all connections ok

hi, the window mechanism looks ok, the window goes up and down with the button but only cm by cm when i open the door the window falls 2cm but when i close i have to use the key or button to put the window up, so no wiper fonction, you think its the CCU? or must i try a new window regulator? to...

did you put the new injector codes in? with the diagnostic box

ok i take a look and let you know

ok but is CCU the multifunction unit BCM? behind the fusebox? i found the regulator on ebay

hi andy, no when i connected the battery nothing happends with the windows

when i push the button , the window goes up or down only 1 cm each time

thanks nodge ,yes it's de freelander 1 td4 softback, must be the CCU because the window goes up and down very difficult with the key or the button, i think i'll find this behind the side trim panel? what is it , a relay or something ?

bonjour, i took the car for a test ride , i have no rear washer or wiper, the front is ok so are the fuses, and there's a noise at the back of the car when i'm driving, maybe wheel bearings? thank for your help, its the first time i'm driving a freelander and i like it

bonjour, back on the road again everything is ok

i'm sure its a very difficult job if you do it with axle stands, the box is very heavy,

from the converter side, not that difficult, i changed also all the oil seals and a new filter, i think it must be the heavy duty band