Search results

I have the servo and master cylinder from a series already, so would be nice to use it. I see your point though

What happens if you rev it when sat still? does it miss fire? cut out? or not rev? reving without blipping the throttle, just steadilly increasing of revs..

Just a query really. On my 88" 1971, I have upgraded my brakes to dual circuit, servo assisted, with 11" 109 front drums etc. Being from a 109" they have 2 cylinders per wheel on the front. When plumbing in the master cylinder on a standard 88" the port furthest from the servo is used. I read...

are we still on about your wife! :D

messed my own link up..:eek: put this in the search bit on frost site.. dinitrol corromax

try this | Product Search – Frost Restoration

ok, its not cheap, but a small tin goes along way, and like most things, you get what you pay for. You will only do it the once, if you use "a n other" brand it could be something you have to do annually. Depends how often you want to get under it and paint it..:D

try it on the wifes legs then, itll save the shaving!

use the link from dirty rhino... the bit with the line under it or google frost restoration..

POR 15 is the dogs b's

bullet connectors in the back, they rust, pull them apart and check.. local earths, fuses. switch, (as mentioned) maybe take the two wires off the switch and link together, see if the lights work, that should prove the switch.

Retract the bid, and its yours still!:)

If you can afford it, do it... Land-Rover Series 2 Bulkhead, Firewall or Dash Panel on eBay (end time 11-Jan-11 00:19:38 GMT)

I can account for that!:D

I posted an ad on here and the wanted section, In need of a lower dash for my series 3. I have had no feed back and still want one. Just browsy the interweb I was directed to L.R series, part number MTC2826. It says its the same lower dash as defender, but I guess the early ones with VIN...

your welcome..:D

Ask Mad hat man if he has posted it in the past!:rolleyes:

I have been emailed, and I was the first post because nobody started a thread saying " Paul, explain about your rust removal" so I started it!

I now see I am 2 years too late, but I was being asked " how" so I answered.

Hi there, I wanted an easy way to de-rust brackets etc on my series 3, without all the hard work. I am not a chemist or physicist, I am an engineer, so this was the solution to my problem... This method works well, after lots of trials to get it right. You will need. A plastic bucket. A 12v car...