Search results

It is mains powered and parked close enough to the garage to be plugged in. I fancy making up a hinged water proof door and house the IEC socket where the blank dummy air intake is...

So the hose on the left rather that the one on the right? With the flow going towards and through the expansion tank...

I've just bought this engine preheater. and the instructions (I've translated from German) suggest these possible installation positions: 1. Integration into the heating circuit: The heater is mounted in the return of the internal radiator (standard assembly) 2. Integration via the...

Grinding it is, thanks!

These don't appear to be rivoted as we can't see a head, it's smooth, think it could be spot welded.

What's the best way to remove the canvas hooks that are on the side rails. A friend needs to fit lockable tree sliders so the canvas hooks need to be removed first. I don't have any pictures but they seem to have 3 spot welds, do you drill these out?

The Forum time must have been wrong I didn't post that at 4am, your post was early morning too Lynall. Have you checked up the breather pipe back to the cyclone oil separator? lynall, Sunday at 3:58 AM

I've replaced it. But I did blow an air line through the old one, nothing came out. I also replaced the air box to turbo pipe, although it is large and easy to inspect and clean the old one had slight damage where the jubilee clip held it onto the turbo. The turbo refirb company recommends...

Thanks, hopefully, I didn't realise the turbo had to be replaced annually...

Finally fitted with new pipes and turbo boost gauge.

I had it refurbished, it's not a new turbo.

Yes I'll check later..

This is better, fitting new turbo tonight, with new pipes, oil and filter change, air box has been cleaned out and air filter has recently been changed...

Not sure, think it is steel...

Not sure where it has come from, no...

It has been working but steadily making more noise. Whilst the Turbo is away for repair I have taken the air box apart and cleaned it, renewing jubilee clips as required. I have renewed the air filter to turbo pipe, turbo oil feed pipe, turbo oil return pipe, and oil breather pipe. I have...

Turbo Technics are refurbishing the turbo. I don't think it is part of a Turbo blade, just looks the wrong shape.

Obviously whatever went in there wasn't removed...

So 8 months later and the replacement turbo is also damaged. You'd expect that the garage fitting the replacement would clear out all pipes to ensure the original debris does not damage the new turbo, but obviously not! On further investigation I found this in the pipe from the air filter to...

I don't have any luxury items... The head unit doesn't have a key to remember and I have a clock which plugs into the 12v socket, it has a battery to keep the memory...