Search results

AAH mine are spot welded on and need to save as much as i can for datums when putting them on my new tub

:eek:

Hi all I have the remains of a defender 90 chassis up for grabs it has a brand new rear cross member in it only fitted a month or so ago but the rest of the chassis is not savable as i have cut out the engine mounts and rad mounts.... the rear tub is still on but no floor and i am going to cut...

cheers "oil dipper" for sending me the wiring plug.

hi i to have that problem but i have found whilst changing the clutch and looking at the side of my gear box i have noticed that some one in the past has dodged some form of linkage assembly to from the diff lock mechanism at the top to the box below. so i am not happy WHY BODGE STUFF

Hi all (bar E-bay) Does any one know where i can get the linkage from the diff lock selector lever that runs down the side of the gear box to the transfer box! for an Lt77 box Cheers James

yer but you have now got a hole in your nice floor !!!!

should just drop out once the cradle is off as mine did. i have a spare td5 fuel pump if you cant get your going

10mm copper from a plumbers merchants the adapt the ends with rubber fuel lines

Hi all Will a td5 rear exhaust section fit a 200tdi centre section?? Cheers James

God your good

how strong is the catch and the hinges?? would it take a high lift jack mounted to it as well as a spare wheel???

that bad?

Hi all I am re wiring my 200tdi defender that use to be a td so it has had a relay fitted and some sort of wiring going to it from the battery to the glow plugs and then a thin wire going off some ware. has any one got the correct way to wire it up!!! Cheers James

Hi all I am about to purchase a swing away spare wheel carrier for my 90 tuck cab but whos is the best? I am looking at the paddocks swing and lock one any thoughts, bare in mind i have no rear door to attach it to so it will need to lock by its self when closed and open.. Cheers James

what about over the diff where the a frame bolts on too? can run the short side (driver side) no problem over the top but what about the long side (passenger side) where the pipe will need to run under the A frame!

sorry brake

Hi all What is the best way of running the copper brake lines on a standard rear axle. Any ideas or photos?? Cheers James

tried the monkeys they struggle to find their bananas never mind a wing

Hi all i seem to be after a needle in a hay stack or the rocking horses pooooo!!! struggling to find a defender 200tdi passenger wing with air vent in the side and the air assembly to the engine air filter... HAVE LOOKED ON E-BAY FOR WEEKS but no luck any one help?????