baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
hi all anyone got a good source for fuel pipes etc, putting 3.5 carb into 90 got new fuel tank and internal pump just need bits to connect together inline filter and vapour watsit
fuel pipes
- Thread starter baggyjim
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hi all anyone got a good source for fuel pipes etc, putting 3.5 carb into 90 got new fuel tank and internal pump just need bits to connect together inline filter and vapour watsitdiscomania
Well-Known Member
- Posts
- 6,949
String will work, it takes a while to soak up the fuel from the tank all the way to the carb but it does work... Not recommended for high speeds though.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
how much do yer need and what dia?
muddythelandy
New Member
- Posts
- 775
I've got loads of nylon 10mm od 8mm id fuel line in fetching shades of green or yella... bought 30m of each and used about 6
Dez
New Member
- Posts
- 359
10mm copper from a plumbers merchants the adapt the ends with rubber fuel lines
muddythelandy
New Member
- Posts
- 775
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
copper pipe sounds good as a gas fitter by trade got few miles of the stuff around just need to find rubbery bits ta
