Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. biker1981

    The yellow lever

    Is this dry or wet i.e does it oil in that I have to drain first
  2. biker1981

    The yellow lever

    No it goes down just doesn't stay there 😊
  3. biker1981

    The yellow lever

    Cheers, Yes it will push down just not stay down, I have 4 wheel drvie in low, just not in high The gear box tunnel, is the square shaped bit ?
  4. biker1981

    The yellow lever

    So today I tried out 4 wheel However the yellow lever doesn't push down I understand the red lever is high and low and I can move this and feel the difference but the yellow lever isnt going down what does this mean please
  5. biker1981

    Hand brake not attached to transmission brake

    Thanks all sorted it the end bracket where the pin goes in has snapped so will get another Thanks again
  6. biker1981

    Handbrake gone

    haha sorry i did mean job. Is it common for the handbrake just to stop working ?
  7. biker1981

    Handbrake gone

    Hmm.. will have ago tommrowo, thanks all. is it a big job getting to the handbrake shoes ?
  8. biker1981

    Handbrake gone

    Noticed today there wasn't much Renton behind the handbrake When I pushed the car turns out the handbrake isn't working anymore but was previously. Before I take wheels off I just wanted some advice please on what to check first Is it just cable operated? Is it likely to have snapped ?
  9. biker1981

    stupid question but had to ask

    Doh... i thought that. So does this mean its not charging?
  10. biker1981

    stupid question but had to ask

    The red charge light on my landy series 3 should it be on all the time when im driving , and does this just mean it charging. sorry if this is a numprty question... i did google it first
  11. biker1981

    Landy tick over screw

    It running really low and stalls at junctions I find I have put the choke on a bit when stopping regularly
  12. biker1981

    Landy tick over screw

    Cheers I think it's the 2nd carb down the webber one
  13. biker1981

    Landy tick over screw

    Can some one tell or if you have a pic where the tickover screw is on the series 3 petrol Landy is please
  14. biker1981

    Bloody lock

    Well just lined the bolts up reallyv
  15. biker1981

    Paddock massai red paint

    I bought limestone paint and massai red paint from paddocks to bing my Landy back to original condition The limestone was brilliant covered a black roof with one coat The massai red was rubbish really thin and see through like painting with red food dye in water it so thin that it would take...
  16. biker1981

    Bloody lock

    I say and replaced the driver side door lock today brand new lock. After I fiddled with all the bolts and got it installed not only is the door sticking slightly the bloody key only comes out when locked which is fine untill u want to drive it, the u have to leave the keys in or put ur arm out...
  17. biker1981

    Spare wheel security

    I've just bought a spare wheel carrier for the back door of my s3 Do I need to secure it ? Is it likely to go missing off the back door ? Any advice on a cheap way of doing it
  18. biker1981

    Newbie thread, can't get the oil filter rubber seal back on.

    Run a flat screw driver round make there isn't the old one in I thought there wasn't but there was, like others have said but of the old oil or grease round the new one
  19. biker1981

    Quick bonnet question

    Pins ah I didint know it had pins in it so that's new so do they just tap throught the middle
  20. biker1981

    Quick bonnet question

    I want to paint the bulkhead of my series 3 as its in good condition but few signs of rust starting So was going to use rust converter then red lead ten painting it To aleatory the bonnet off to I just detach the lift at the front and pull it up at the back Us it a pain to do should I undo...
Back
Top