Search results

Hi all Have heard good things about this engine treatment Any one any views/tried it /comments Cheers Paul:car:

Will start a thread and see what others think:o

Cheers Dave How much do you need for a 300tdi:rolleyes:

Hi Dave Will check it out Have you ever used Molyslip:)

Casrol Magnatec in local Tesco (Wicklow) at €5.75 a litre-sound good:D

Well guys I gave it a shot and OMG:eek: The brake pipe union would not come undone:mad: Loosend both swivel pin bolts no prob:) Then found swivel grease started to leak fom the bottom of the:doh: ball Then found the brake pipe bracket was interlocked with the mud guard thingy:mad: Put it all...

Have just done this with Delphi ball joints. Getting old joints out was a swine-had to bring the arm into work and use big vice and very big stilson :eek: Also before removing make sure you measure the distances the old ones are at and put the new ones in the same so tracking and steering centre...

Am going to give it a shot at the weekend:eek:

As Mister Noisy said you could use a spanner but I think the torque is particularly important in this case:doh:

Hi Richard Thats it exactly-you see the problem I think the 200tdi is different:mad:

Looks good Thanks for the Info:D

Pics are always good :D

True Buster I can only assume you torque it up then re connect the pipe Alas that does mean the system will have to be bled. Is it that difficult to do the bleeding or is it bleeding hard:eek:

Hi Buster If you have RAVE look at the discovery section and under section BRAKES then REPAIR then Front brake calipers there is a diagram that shows it better than I can explain Maybe if anyone can attach the diagram to the post that would be great I have and old Adobe without the camera...

Hi Buster On mine on the drivers side when you look down on the swivel bolts the hose is at the right and connects to the bracket on the right.The pipe connects to the left of the bracket and goes across the right hand bolt and connects to the caliper so there is no room to bend the pipe. Hope...

How did you do the push button start:D

Thanks for the replies people I had a look when I got home yesterday and the solid pipe goes from the bracket where it connects to the flexi pipe across the top of the caliper and connects to the caliper so I cant see any way of bending it out of the way.Busters photo looked a bit different to...

Another quickey Buster Haynes says around 1.5kg preload but that is with the unit dismantled.I read somewhere that in situ it should be around 7kg Cheers Paul:)

Cheers Buster I was a little worried about bending the pipe in case it cracked.I spose if it does it can be replaced :D

Morning all At the weekend I removed the drag link and track rod as I am going to replace the ball joints.As I had it in this state I thought I would give the swivel pin pre load a go.Prob is that the fixed brake pipe is right on top of one of the swivel pin bolts.Does this mean the pipe has to...