Search results

The only thing they have done wrong is call it by the wrong name, personally I don't like the look, but they have aimed it at a specific market, it price is relevant its looks are relevant , In my opinion it should of been named in the region of a freelander sport or EVO or something like that...

Yep ;) That's what I'm doing at the weekend

Vehicle has not moved does not mean it has not moved on its wheels It means the eas has not moved , ie it has not changed height

Lol I'll report my findings ;) Central locking fault next :(

Can't really make out if it's Turbo wine or not , sounds more like a leak in boost but there isn't one, it's loud! You can hear it outside easily and in the cabin it's really noticeable ,

I have checked plugs but not wiring ,the difference is the same form bottom to top so more than likely nothing to do with wiring . I have a plan , I'm going to pop off the little rubber link with the bags deflated via the eas unlock software , and then using the "get sensor height" section I'm...

I got a td p38 with a wierd noise, it sounds like a bus , you hear more turbo than anything else , sounds like a whistle instead of an old rattly diesel lol I have been over all boost pipes and none leak , it has had another intercooler fitted ( cheap so thought I'd try it) just in case it had...

Completely agree ;) and I appreciate every ones input But please don't fail to forget that before this problem came about there was no 20 points difference in the figures and it sat level !! I have tried 3 sensors on the nearside front and all 3 have need to be "set" 20 points out from the...

Thats why I have referred to them as points.... It just so happens that near enough 20 points almost eliminates my 25 mm problem lol Small increases made a small difference, 20 units on the problem corner equated to 25 mm I moved a non problematic corner 2 points (as a test)and it made a 10 mm...

I seem to of managed to get it reasonably level but I'm not happy with the way it's done, the figures I pulled off before this fault ever happened were reasonably even left to right, (within a few points of each other ) I don't have a picture of this Here is a good example With these "exact"...

All of figures are between numbers quoted

No bent sensor arm

Come to the conclusion that whatever figure you input , the near side front is always 20 mm higher:( Any other ideas

With the car in " access" I have 405 mm every corner The height sensors are all set to 65 The "live " height from the sensors are as follows As can be seen there is a large difference on front readings If I try to allocate the difference on the other settings to sort out the height imbalance I...

This is with the car level I have adjusted the height difference out using the down function If I now "write" this figure in to the near side front write box It says fault as the target is wrong

Re read please , these are the figures that are given back when I "get sensor height" not what I have input my self!

With the vehicle in the low setting I get when checking heights Nsf 80 Osf 90 Nsr 85 Osr 80 But at this setting with these figures the actuall front near side height is 20 mm higher than the left!:( To get the front to level up I need to make the nearside 20 points lower than the OS When I...

Fair enough but If i "write" the 20 points "out" on the other settings it still sits exactly the same!!! And yes it is accepting the write as I go back in and check it by reading it again I'm gonna have another play and type in figures again I'll report back in a bit

I'm not trying to calibrate on the bump stops I was referring to the height sensor readings being uneven when the bags are deflated So when the car is on level ground I get NSF 45 Osf 65 Nsr 65 Osr 65 All within 1 or 2 points So the NSF is reading 20 points lower!!! This is the same with 3...

Surely manually setting the ride height( checking the real measurements outside) in the height section and using the up and down features to set the heights you want then transferring the height reading into the write box will be sufficient ? If I do this I'm am 20 points out on the near side...