Search results

mass air flow sensor ? try unplugging it and take it for a spin , unplugged it will go to a base map in the ECU and drive ok if the sensor is at fault . dot a definate cure to your problem but may eliminate the MAF from your enquireys :) Baz

Mmmmmm AT's then I think ! Thanks for the replys peeps . I don't really venture off road but it's nice to know its capable should the need arise ( snow etc etc ) so something that does perform better for 99.9% of the time is probably the way forward ;) Thanks again Baz

So both of my rear tyres are nearing replacement so I popped over to my local tyre shop to enquire on prices for a pair of AT2's in 255 65 16 to be told they've stopped making them having been replaced by the AT ! How much truth is in this ? I can order AT2's online to be fitted locally but...

OMG ! That completely passed me by ! Thank you :) I will get on it , but won't be until Thursday as I'm not back home until then ! Thanks again :)

Sadly not :( it's inside the round bit in the external housing ! Not looking good really , I can't believe given how easy the repair would be that the part isn't available instead we are all left needing a complete wing mirror !

Hi , sadly stc4625 isn't the bit :( It's a very small strip of white plastic with teeth on one edge and a small plastic ball on the end ( ball is about 3-4 mm and the "rack" part is about 15-20 mm long )

Hi everyone , mrs brushes td5 is suffering the common problem of electric wing mirror adjustment not working properly ! I've had them apart and found the left to right axis plastic racks are broken , now I've popped the captive end out of their sockets and tried super glue and melting them...

hes not from essex hes from bas vegas . there different from the rest of us ;) pmsl

hi and thanks horse62 :) i wasnt aware of 2 springs !!! all i did was replace the spring i saw hanging off and bunged it all back together !!! will have another look tomorrow as iv'e run out of light now . thanks again , hope it works ;) baz

afternoon lads and lasses :) well i finally got fed right up of the broken door lock spring on my tailgate causing frustration when coming to open it as it meant climbing in through the rear side door to pull up the locking pin , so i ebayed a set of 5 springs and have fitted the correct...

hi peeps , got some quick to dissipate white smoke along with coolant loss so at the weekend i'm doing the head gasket . So i've ordered a 3 hole gasket as thats how many are visable on mine , a P gasket , inlet / exhaust gasket , thermostat and a breather O ring , also bought an angle guage...

fitted my shiny new tubular winch bumper :) mucho happy

New pads allround , with new slider pins/springs at the front topped off with a new N/S/F caliper and fluid , due to a leak !!!!!!!! also just installed a genuine landrover penny (was only £4 from my local main stealer ) ;) all in about an hour ! Well chuffed :D

"how many do yu think we got?" very good smart arse ... and as pointed out already all your link does is take us to the home page ! posts like yours are why i hate forums ............... whyu not help some less experianced forum users and either tell us where this faq section is or post a...

which faq section ?

essex ! ssshhhhhuuuuuuuuuuuuuutttttttttttttttt up :D welcome

the advent of power syeering has seen a massive increase in front tyre wear ! people ( myself included ) tend to wind from lock to lock without moving either forward or backwards at the same time ... now go to an exterme lock at a standstill and in order to achieve this the tyre side wall...

that would be the doors !!! spose you could get in bo and luke duke style ;D:doh:

engine to chassis/body earth ?

was hoping for somehere a bit closer as the logistics of leaving my car there for them to sort it is a nightmare !!! would have used mansfields a few years ago as i lived in manningtree and know the companys founder duncan quite well ... moved further south into ssshhhuuuuuttttt up land for...