Search results

works on any freelander

Part 3 Before you fit the new dash there are a few plugs that need to be extended,as centre console comes out further, than old model. Extend tailgate window opening switch, and sunroof switch to just after the handbrake, as they now mount in the arm rest console. The next switches to be...

Part 2 first you need to disconnect battery,remove airbags, then centre console, steering wheel, and indicator/wiper stalks, you do not need to take anything else off to remove the dash forby the odd electrical connector. I will not go into how to remove these parts,as it is reasonably...

cant mind off the top of my head, will be taking my bumper off next week so will measure it for you, unless anyone else can help you

Hi chaser, will get to part making the instruments working, eventually, but first i have to let everyone know what is involved in getting dash to fit , along with switches. You and some other members are reading too much into this instrument pack thing and thinking there are problems where they...

Dash part 1 The parts you will need are complete dash assembly,along with instrument cluster,complete centre console,heater panel and passenger side airbag. Dash assembly should come with a dash wiring loom attached, if not make sure you get the plugs for the switches beside cupholders, the...

Sorry for going off on one here ,nothing wrong with a bit of dramatic ****,as you say. It gets my point across that some of the replies on forums are pure conjecture,by people who do not know what they are talking about. Your first comment on the last thread was negative , "As said ,it wont...

BUT !!!!!! Remember when you were told not to touch that because it was hot or if you keep doing that you,ll go blind DID YOU LISTEN ? You had to find out for yourself yes, it was hot No, i can still see So, if you beleive in the saying GO BEYOND HE WHO DARES WINS...

For everyone who told me that as far as they knew,this could not be done,You know who you are OP, C, i take my hat off to you and admit i should have listened to you. If you want to install a new model dash into your car, this is what to do Buy a 53 plate onwards freelander.

mileage is stored in dash, correction is done with dash out,or buy a dash that has mileage close to yours

As the saying goes "been there, done that" 3 small problems to fix, then away the thread goes would i do it again? yes, now i know how to do it should i have started it? 1st week No, 2nd week mmmm, 3rd week never again, 4th week yesssssssssssssss Was it worth it? in the end, yes

About to start 3rd thread on facelifting freelander to 2004 model, covering dash installation current vehicle 1998 xei freelander or is it 2006 xei freelander

Its easier than it sounds, send me your plugs and relays and i will make it up for you

Sorry to disagree with you chaser, but until you have tried it how can you possibly comment. Also Freelanders never came with mechanical drives all electronic from start

extend it with bolts if you do not have access to anything else

fits no probs, electronic speedos on them all,dont be a woose :) go the full hog and fit the 2004 onwards dash. Youve done the door panels, now finish the job:eek:

think ive got a spare one if your interested

Door Panels part 5 For the final part you have to add 2 five pin relays into the loom you have just done to get the passenger window to work,relatively straightforward. Relays available from your local accessory shop, pin layout usually standard, wire up as follows pin 87 12v+ pin 87a...

Door Panels part 4 You should now have your door panels on,and be able to work the central locking from each door panel.Now to wire up the electric windows, you will need to purchase two 5 pin relays to get passenger side to work.We will start with the passenger side wiring first. 4 wires from...

If you cannot get one let me know, i will be going back up in 2 weeks for more bits