Search results

I use ADSA, Tesco and a local station with my RR petrol V8, peugeot 207 diesel and rover 420 diesel and have never noticed any difference in any of them! The only difference I ever had with the rover, extra 70 miles to the tankful, was because the petrol station I used to use was on a slant! and...

I did my seats a couple of weeks ago, the first one was a bit daunting not having done it before, but the second was a piece of p!$$. Upgraded the thermo switches at the same time (£4 ish) and have to say...WELL worth it. Took the time to check the BCEM plugs were not corroded while i had the...

You can repair the fuel release button, I had the same problem as you. You will find the bottom of the switch has 'fallen' out!!! Just push it back in and super glue. I did this then ran PU (polyurathane) sealent around the join. Been ok since.

I owned a diesel 2.5 TD5 discovery on an 02 plate, I now have a 4.6 hse P38 RR on a 97 plate. The TD5 returned about 27mpg on a run where the RR returns a max of 21.6 mpg so far. Saying that the RR only does around 9.6 mpg around town, the diesel TD5 did a lot more. The power on the RR is far...

You will get used to the humor!! Welcome to the forum, plenty of knowledge here, and very quick with the answers.

Check that you don't have a two pole (twin contact) bulb in place by mistake instead of a single pole (one contact) bulb, it sound like you may have!

Shared! Best of luck getting it back.

Thanks Mozz, if I can't find the fault I will call in on him.

Mine are auto dipping when in reverse!, does photochromic mean they change tint depending on the sunshine?

If there is no fuse then I would assume the element burns through untill a break occurs stopping it from working?

I'll check the lead from the head unit to the cd changer first. I replaced the 'o' rings on the heater and changed the bulbs behind the dash recently so I may have upset the plug or a wire to the head unit. I'm based in Boston, Lincolnshire. I will check with a meter for continuity the wires in...

Is there no way of fixing them? Where is the fuse for them? or is there no fuse?

Thank you for the advice, I will update soon.

Radio works fine no problems but the cd player has a very low volume. Anybody tell me what to check?, it has a Harmon kardon system. It is a 97 4.6 hse.

I thought my onboard computer was broke the other day.....9.6 mpg!! 4.6 hse P38. :jaw:

Followed the rangerovers.net instructions on the heated seats and upgraded the thermo switches and mended the breaks in the heated elements. True to form the breaks were in the base of the seat in the crease of the leather. Also had a broken connector to one of the thermo switches. First seat...

Always worth checking the multimeter lead hasn't got a break in it's wire!! Getting power to the connector so now taking the seat apart looking for a break in the seat base.

Before I take off the BECM plugs to see if they are corroded, can anyone tell me 'am I going to lose snyc?' Do I need to disconnect the battery first?

Arh....ok thanks wammers, so if there is power to fuse 2 under the seat but not to the connectors that join to the underneath of the seat then the BECM is at fault?

As the title says, does anyone know the exact location of the heated seat relays?