Search results

Ive got a 90 with a discovery 200tdi conversion. ever since beening at a rather extreme angle whilst laneing the other day it is no no longer driveable due to having no power. it will idle fine but as soon as you apply any load to the engine it will give up the ghost and stall out. I am...

i'll give it a go and see what happens, cheers

Not entirely sure on how the cyclone works, but it is still blowing out air, would this not suggest that is still working?

Sorry, yeah its a 200tdi off a disco

Been suffering with this problem for a while now but been too lazy to sort it out. Oil all over the rocker cover and rest of the engine for that matter. its pushing up and through the oil filler cap. when you remover the cap you can feel hot air being blown up and out. if anyone could shed...

Series door are the bees knees in my opinion, love the summer sunshine!

My tyres stick out much more than that, its not an mot issue however technically it is against the law. ive been driving around for the best part of 2 years and never been stopped because of it, i really wouldnt worry.

New Steering box in this weekend with any luck, hasnt moved for the best part of a month now :(

We shipped a load of our porsche rally cars off in shipping containers, i wouldnt even consider doing any work on one of them in there, let alone on a landy, except maybe change a headlamp or 2!

Just a quick one, does anyone know how much pas fluid a 200tdi with a 4 bolt steering box requires? If just replaced the box and the system is pretty much empty.

This thing is going to be a monster, looking forward to seeing it progress :pop2:

Right so i've got a d-reg 90 and i've had to replace the wheel studs, i bought a set of 5 wheel studs, part number FRC6137, however when they arrived it turns out they have 41 splines on them as opposed to the 31 splines on my current studs. Does anyone know the correct part number for wheel...

Surely all this is actually doing is lowering the shock top mount height meaning at full extension the axle will be lower by however much lower the new mount is, the extended bump stops are just to stop the shock bottoming out under compression. seems like all you would actually need from this...

Thats the one! Thanks a lot trax!

Does any one know either the part number, or at least just the name of the little orange plastic clips that are attached to the gearbox tunnel and other floor bits that are used to screw all the panels together. Cant for the life of me find any anywhere because i dont know what to search for!

Hi guys, got my seat box in pieces at the moment as it needs a bit of a rebuild. i was just wondering though, the battery box has quite a few pre cut holes in it. Obviously if im wading water is just going to be flooding in through these, is there a reason they are there or will it be alright to...

Perfect, thats exactly what i wanted to hear! Cheers bud

Does anyone happen to know if a series seat box will fit into an early 90. I'm not to worried about the transmission tunnel arrangement but are the width height and depth measurements the same? Just trying to figure out the cheapest way of repairing my knackered one.

Yeah i just ended up bending the tab down behind the vertical rail. They are so simple after the first time!

Should load from the the front.