Search results

general grabbers (the new AT, not the AT2) Once my scorpions wear out that's what's going on mine

irish thanks for the tip, will do although once it's back on I'm not planning on taking it off again. I'll be replacing the rusted screws holding the foglight in so I can remove that instead

just a update - LPG cars are now allowed on the chunnel. Mate of mine just came back over and apart from having to let the chunnel people know and they put an additional orange sticker on his windscreen no difference. He tells me that they now also allow caravans - no idea of price tho'

Data brill, pry bar & block of wood at the ready - just didn't want to break it

mornin' all in the process of replacing the low level screenwash sensor yesterday and as I can't get the front drivers side foglihgt out (to remove the washer pumps etc.) I'm having to remove the front bumper. Got RAVE and as instructions so far I've: 1. disconnected drain tubers & wiring...

had my BRM system fitted by local landy independanct as apparently it's the best sequential one for the V8 Had it done at Maltings 4x4 (01427 753394) and speak to Andy. He should be able to give you details of teh kit's they recomend then it's just a case of finding someone local you can...

Dom I'm in Auckley & interested. There is also a decent site in Kirton Lindsey, just other side of Gainsborough. Before you all start yes, mine is a P38 but happy to go off road as long as I don't bend it (it's my daily driver)

rob according to the manual, P38 wipers are 22". To be honest I've got 22" aero's on mine and the passenger one does look too long work really good tho'

According to the computer I get between 18-21 mpg on gas but I don't take a lot of notice of that. I have a 90L tank in the spare wheel well and as it can only be filled to 80% that means it can take 72litres of gas and I get approx 260 miles out of that which equates to approx 17mpg and at...

just my 2p worth but before I got mine (after 2 years of looking) I looked at many of the P38 diesels because of the engine (BMW). Every one I tried, bearing in mind I came out of a Toyota 4.2 landcruiser, was like driving a boat. Really sluggish and when you gave the engine the beans it...

sounds like you have a leak somewhere - if she comes up and stays there once you are moving and works as it should with the selector switch then valve block, height sensors etc. are working as they should. When you come to get in the truck first thing has she dropped to bumpstops (that's the...

sounds like height sensors sticking to me.

Mike Although I'm nothng like an expert I would asume that if your RR has the BeCM system (RF received, alarm & immobiliser) then it would be a massive & probably quite expensive job to rip it all out. IS a better solution to in some way fool the leccy box that the immobiliser is working...

banner on mine - spins it round like a good 'un and I don;t have battery drain above .35:)

just done mine with Swift cover 9 years NCD 47 years old and got the wife covered to drive it as well protected no claims, legal cover, windscreen cover £200.00 excess And they were one of the very few who don't consider the LPG a performance mod so no extra cost £314.23 fully comp

All cheers for the advice, loks like this is a go-er. The prob with the foglight is that 3 of the 4 screws holding it in are rusted solid and because the washer bottle is in I can't get behind them to either cut them off with a dremel or drill them out but I will be replacing these when I get...

mucky truka give maltings 4x4 a ring on 01427 753394 (they are in westwoodside, between Doncaster & Epworth) and speak to one of the chaps there (Andy's the guv and there's nothing he doesn't know about LR). They are indy LR and can do anything on everything from a 1948 series I right up to...

Afternoon all I know this is really minor but it's the only think on my P38 that isn't working (and therefore bugging me). I've got a replacement sensor and after looking at RAVE and Rangerover.net for instructions on changing I've hit a barrier. I can't get the drivers side front...

aero ones from ebay. £11 for a full set (2 front & one rear) and do a brill job, no squeaks, shuddering and seem to suit the look of the p38

give maltings 4x4 in westwoodside a ring ( 01427 753394) Andy there live & breathes land rovers from 1948 series I right up to new discovery 4, defender & range rover I've used him for all my spannerwork on my P38 and have ben well impressed - full workshop, all diagnostic and markets them...