Search results

Mine takes much longer to use the top half than the bottom half of the guauge....

Just epoxy another bolt head on over the top, then sell the bugger!

How interesting. Seems this thread is very like the car that started it all. Minor provocation and a gasket explodes all over the place! Seems like a disaster at the time, but turns out it's nothing that we haven't seen before, can't fix, and with a few modifications, can be made much less...

i have had success with either mole grips on the heads of the shear bolts, or hacksawing slots in them, then using a screwdriver. MW

Not me, but this is what came to mind when I read your post. Historian arrested for jaywalking, after being assualted by Atlanta police. MW

My Grey socket has 3 live feeds, 1 permanent, fed from the 'trailer light' fuse on the engine bay fuse box, then the two voltage sensitive switched lives for the fridge and battery charging. Two earths, one for fridge, and one for the rest, a spare, and a feed for the reversing light. I have...

Swivel Pre-load?? MW

Typical gaylander! lol

V8 Tunnel joy! And in a 101 it lasts even longer lol! Also, just when you thought you had a seen almost everything a V8 could be strapped to, along comes a.......chainsaw! YouTube - V8 Chainsaw MW

Which graco seat though? I could just barely fit the baby carrier one in the back of a RRC, which i guess will be about the same. was literally with the belt at full reach. the seat base will use less belt, but the angle of the belt may not be right, because of it coming from the wheelarch...

Dunno about CV joint, but mine does this sometimes. Usually accompanied by a brief showing of the traction control light. MW

Plan your journeys so you only need to turn right then. Another vote for wheel bearing here. MW

My 101" has a Rimmer Stainless sports exhaust (previous owner choice). Mrs MW says it sounds very like my father in laws TVR. So much so that she only knows it's me on the way, when the TVR would already have arrived! MW

Bit of a dredge, but I experienced this very same fault on Holiday last week. Here's how I overcame / fixed it! The get you going bodge: Take off the column cowlings. Remove the barrell from the column by undoing the two shear bolts. Mine yielded to my mini molegrips, and a lot of small...

If you are paying the extra for dealer facilities, are you really going to want to take 4.5 hours away for a warranty issue. Of course, as a general dealer and not specialist, will they be able to do anything with it anyway? I'd definitely look for something nearer. MW

don't know the maximum weight, but the trailer was plated for 3 tonnes, and it felt pretty heavy compared to anything else i have had on the back. That was behind the Disco 1 v8. was a mobile climbing wall, with **** weight distribution, and nasty aerodynamics, but we could get to and sit at...

Wrong place for the suspension compressor? Could it be your fuel pump? That runs up to pressure then stops, but needs to run constantly when the engine is running. MW

Surely simple decency says if you slag someone off wrongly in PUBLIC then the apology should be public too, not a weasily little PM. As for not coming back as KFive, with your behaviour i doubt whatever user name you are using now will be hard to spot. MW

I've checked and can't see anything from KFive to confirm the box has arrived, nor his public apology for accusing the seller of ripping him off.... Has it actually arrived? MW

I have a cast Iron insurance against sex happening..... It's called Marriage! MW