Search results

Sorted thanks, the drain was well and truly blocked, the open end was tight on top of the inner wheel arch so had no chance of emptying properly, took it out and cut the rubber to allow more flow.

Fair point, longevity is a must.

Defender, sorry.

Need to replace my 04 TD5 door seals, go round a bend, water comes in! Which make? Are the B r I t part ones any good?

still in design stage.

Thanks guys, job for Christmas day I think.

So turned on the ignition this morning only to hear the sound of running water, odd I thought so ignition off, it stopped, on again, its back. fan was on half speed, turn it off, it stopped. Not heard this before, so bonnet up, definitely coming from the heater air inlet on the wing, started the...

Im thinking of a demountable unit or a few, storage, sink/hob/fridge/bed arrangement. Roof tent possibly.

That is the question for a Landy camper. Seen many DIY fit outs on line, should I use the flight case type aluminium profiles and board or the light weight ply and T type edge trims. I ponder, any recommendations on robustness, ease of assembly or supplier. Difficulty no real issue as ex-joiner...

Im not after cheap parts, im after a choice, seems that IW trailer parts are list price with no competition. Im after up cycling a 20 year old trailer by replacing the running gear to make it road safe but for the price of the replacement parts I could buy a new trailer. That only makes sense...

Anyone know if anyone else makes compatible parts for Ifor Williams trailers? Spares seem too expensive for what they are!

counterbore end miller, perfect, cheers.

Cheers. Done that on the back, now need to do the bar side for a washer and nut.

kind of like a mix of a stepdrill and fostner bit for metal!

Hi All Not being a metal worker, can anyone advise on a suitable milling bit/gadget that would allow me to drill a hole and mill flat the immediate area around the hole so a bolt head can sit flat on the plate and not on the bars? If it fits in a cordless drill even better. Cheers.

don't bin it! use it for jacking up buildings and other structures, just not ones with wheels.

Hi All, Anyone have a fitting instruction for a Mantec vpl dr 0129 rear spear wheel carrier? Or a link to one? Cheers.

Bonnet mount falling apart. Planning to mount spare on rear so I can see out the front again. Seen these on fleabay, VPLDR0129 Mantec carrier. Are they any good for my TD5 110? Cheers all.

Anyone recommend a sprayer? in Herts or northern home counters would be best... Cheers.

So had the engine management shut down everything a while back, fault no5 injector, had it changed. Now 2 and 3 are playing up. Going to get them all changed. Garage advises possible water in fuel may cause issues. Can any one give us a clue as to why water would cause issues? Garage said avoid...