Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Paul.G

    Information needed regarding Hybrid

    I have a 1965 Series 2a on a shortened 1971 Range Rover Classic Chassis, all running gear is Range Rover, with LT77 gearbox and 2.25 petrol engine, Bulkhead and body is all 2a. I have all paperwork from the 80's SVA test and Docs for both vehicle's used. What I would like to know is, could I...
  2. Paul.G

    Basket case Thor

    Just read this thread and it sounds very similar to how my Disco is behaving, is your Disco still running fine after the ecu was reset?
  3. Paul.G

    Disco 2 Petrol tank question

    Thankyou for that info, much appreciated
  4. Paul.G

    Disco 2 Petrol tank question

    Hi all, I am wondering if anyone knows if a Discovery 1 Fuel tank is the same as a Discovery 2 Fuel tank any info much appreciated :)
  5. Paul.G

    Have all V8 owners got a stiff one?

    Not heavy but tighter than my series 2a, off road bumps I cannot keep a steady throttle position but with the V8 Disco off road I can keep the accelerator at one possition
  6. Paul.G

    V8 Disco 2 cold start help needed

    I am frantically searching Rave to find the section I studied that made me change the ECT sensor to sort out the gear changing, although it has been changed the starting fault has not altered. I know it must sound strange to you being so good with engines that changing the ECT sorted my auto...
  7. Paul.G

    V8 Disco 2 cold start help needed

    It is times like this that I wish there was a motorway to the mainland so I could meet up with folk that know about Land Rover engines, there maybe is a body here but I have yet to find him/her. Do the ECT Sensor and MAF Meter work in conjunction with one another? I know new parts can fail but...
  8. Paul.G

    V8 Disco 2 cold start help needed

    It turns, but I only touched it gentle and did not want to try and push it back, it is getting gradually worse, when driving off now she is coughing and spluttering till she warms up the running sweet again, I fitted a new coolant temp sensor a couple of weeks ago which sorted the gear changing...
  9. Paul.G

    V8 Disco 2 cold start help needed

    Hi Peter, the idle air control valve is all cleaned but still the problem exists, I spoke to a Shetland Land Rover Club friend and he said it could be the cold start sensor, I have done web searches and cannot find one or where it is located, I thought only diesels had them, can you shed some...
  10. Paul.G

    V8 Disco 2 cold start help needed

    It is the unit that has two pipes and with pipes removed it has something that resembles a countersink bit inside? I did gently push it with my finger but didn't want to force it as I read somewhere not to as it can knock it out of position, I will give it a go when I get off work tomorrow...
  11. Paul.G

    V8 Disco 2 cold start help needed

    I did think it might be that Peter, I had it off a while back but couldn't clean it very well due to it being a sealed unit, any tips for cleaning or do you think it might need replaced?
  12. Paul.G

    V8 Disco 2 cold start help needed

    When my Disco is cold she starts ok, runs for 30 seconds then cuts out, it does this a few times then is possible to drive off, almost as if trying to run and old car without choke. Please can anyone help me as she runs sweet as a nut when warmed up
  13. Paul.G

    Disco 2 Auto Wasn't changing up gears until I.......

    Thought I would post this as I couldn't find the info on here. My auto wouldn't go above third gear and was having to rev the gonads off it to go from 1st to second and again to 3rd, I did manage to get it into 4th but that was in Germany at 80mph :] so I looked on here and all I could find was...
  14. Paul.G

    Disco 2 Audio Question

    Hi Brian, there appears to be a brown plug coming from the black box under P/S that I am assuming is the amp, not had a right look yet at amp and multi changer, M/C Cassette wont eject so thinking no power going to that either. Thanks for the good luck, think am going to need it :]
  15. Paul.G

    My pal has just messaged me bud, thinks he might have one for my motor, if not I will have this...

    My pal has just messaged me bud, thinks he might have one for my motor, if not I will have this off you, thanks
  16. Paul.G

    Disco 2 Audio Question

    Hi all, Can anybody tell me if a XQD000340PUY Head Unit will work in my 2002 Discovery 2 please, or would I need the XQD101400LNF? my Disco had an aftermarket Panasonic unit and I want to put it back to original so I can use the steering wheel controls and multi changer under the drivers seat...
  17. Paul.G

    Aftermarket head unit

    Yep it is connected but it looks like the cassette is maybe in the wrong way or I have a fuse blown, power fold mirrors are not working either, I can hear the relay click when the button is pressed but no movement
  18. Paul.G

    Aftermarket head unit

    Thanks for that, I will have a look when it stops raining, my last v8 Disco 2 had Harmon Kardon sounds, I couldn't eject the changer cassette on this one, will it not eject unless it has a standard head unit?
  19. Paul.G

    Aftermarket head unit

    When I bought my Disco 2 it had a Panasonic head unit replacing the land rover one, as I was working on my seat reclining mechanism this morning I discovered there is a six disc changer under my seat, will this head unit run the six disc changer or am I going to have to buy an original head unit
  20. Paul.G

    cannot adjust seat rake

    Found the problem, pulled the wheel to see how they come off but never expected it to be so brittle that it fell apart in my hand, have now got a shifter for adjusting seat till I can source a new wheel, thanks again
Back
Top