Search results

Mine is TA171652 so that puts mine long before the mod ha, an no sign of yellow paint on the cover either. I cant strip it to check at the minute tim, but when i do if it turns out to be the original type would you recommend i stick with that or change it to one of the others?, which ever is in...

Thanks for that jonny, i'll check my VIN later and look for any yellow paint on casing

Hi, I need to replace my timing belt for the first time and i have been looking them up an i see a normal one and one that says modification?, could somebody please tell me whats the difference and how i know which is the one to get for my 95 300tdi disco?, or point me in the direction of...

Cant the lift pump be a cause of low power?

Im sure someone will correct me if im wrong but I personaly thought that just using standard shocks with a lift means they will be at their limit before full articulation is reached. Suppose it wouldn't matter if only used for rare light off roading, if replacing shocks why not just go for +2"...

I would also advise using a flap disc to clean the metal before welding. You can also use it to go over your welds afterwards to tidy them up a bit if you wanted, as all that matters is that the weld is strong enough for the job. Example of a where flap disc was used on a weld that has to be...

Thats cool :)

Evening all, One of my friends thought i had a small hole in my block, till he went at it with a screwdriver and pushed what im guessing was a piece of plastic down inside, since I've been trying to find a replacement part number for the pieces which are supposed to go into what i think are...

Welcome :)

Not unless you have damaged it so that it is jammed shut, but i doubt you have. Replace it with a new one and see if it solves your problems is the easiest way to know

Have you checked the thermostat?

As far as i can remember i think there is spot welds holding the quater panels on too as well as fastners

Thanks for the info :) . It was grinding from the minute i left work, so its now parked up and i will start stripping to find the problem soon hopefully, weather dependent. How many bearings an seals are in the rear?, there's some with only 1 seal and some with 2 etc.

Afternoon all, I was wondering if soneone could answer one of the couple issues ive had lately. I was on my way home from work yesterday when my back wheel locked up, i tried driving forward and it released again. So when i got home i jacked it up and checked for play an there was only a...

Evening all My passenger window regulator gave up and on removing it i noticed that the strip that goes onto the actual window itself has half rotted away. I have found replacement regulators but not one of them comes with this strip to hold the window :/ would anyone be able to tell me where...

That is probably just the bearing in the belt tensioner pulley, my own was making the same noise an stopped when i replaced the bearing

Ive replaced the hoses with silicone ones an cant see any holes and all clips are tight. It is only when driving above 2000 rpm, if you let go of throttle it will stop then start again when you press it again. I will have a look at the uj's when i get chance The local landy specialist i went...

I have a loud noise like air is being forced out of a small space at high pressure, it only makes the noise when the pressure of the turbo is kicked in and only while driving, it gets louder with higher revs. The power does not drop when its happening. I got told its probably the turbo so i...

Hi all, i had my disco parked up for about 5 months an i am now faced with a weird noise like a buzzer going off when there is pressure on the engine during the turbo rev range, anyone had anythin like this before and might be able to shed some light on what it could be? Thanks

To your question about the selector plate, yes it is a changable part, try ebay thats where i got mine