Search results

TD5 not TF5!

It's a 2002 TF5 Auto 3 years ago I fitted a float switch in the coolant header tank to warn of sudden coolant loss e.g, if a hose has burst, It operates a buzzer fitted under the dash. Cost for parts under £10 plus about 1 hour's work to install. The current coolant loss showed the system...

Got an O2 TD5, In the course of checking the float switch in the coolant header tank I left the ignition on for some time. On turning on the ignition various warning lights descent, ride level ABS, red alarm etc came on. I locked & unlocked the car several times to clear the locking warning...

The above lights stayed on when the ignition is switched on. The car has to be unlocked with the key - niether fob works. The rh front wheelarch was replaced an hour or so before this problem arose, Some hammering was involved - I'm wondering if this has affected the ECU which is mounted...

Thanks - I'll try that.

Got an O2 D2 TD5. One of my 2 keyfobs no longer locks or unlocks the car. The red light comes on when either button is pressed. The battery is new - 3.25 volts. Advice please

Thanks, I'll try that.

Suggestions for sourcing please - apart from Chinese clutches & a complete used compressor google has not been very helpful.

Thanks - presumably a dedicated part or could something similar be used?

The shaft for the aircon compressor is not being turned by the pulley when the engine is running. The system has gas. There are 14.7 volts at the plug for the aircon clutch socket & there is a good ground connection. The clutch coil is 4 ohms. Is this normal? If so the electrics would appear to...

It doesn't. what next?

My D2 TD5 02plate aircon isn't working - suggestions please for checks & lests & re - gassing if that's needed. The fan works properly - the air isn't being cooled.

Hi, I have 12v at F7 but am unsure about the location of the blower relay C153. There's 0volts on the brown lead going into the connector C431 (which I originally connected to the battery) I presume this fits into CO 15. I can't see C647, C901 or C056. I've attached photos of it all - a bit...

Re first reply - the key fob didn't work until I pressed the inertia switch, then it all returned to normal. My Haynes wiring diagram for models WITHOUT AIRCON (mine has) shows a lead colour w/r from F7 to the heater control system. Can I apply a live feed to this & bypass the fusebox? I also...

The heater fan on my 02 TD5 is not working. The fuse is ok. I searched online for advice & found this...

Hi I bit on the bullet & bought a used box & torque converter off ebay from jbs4x4 100% +ve feedback & lots of testimonials - total cost with fitting £850 - problem solved - so far so good! Fingers x'd.

Diagnostics showed no faults in the geabox so I've had the oil & filter changed. There was some dark grey sludge in the gearbox pan. it could be seen in the filter port & the drained oil (approx 3.5 lt) is also black. The replaced oil level was checked 4 times by going through the gear range...

Thanks -I'll take it to my L/R guys in the morning for tests.

Thanks - how do I tell if it's EU3?If it is what does unplugging it tell us?

Thanks- done that - revs peaked at 2800 for 3 secs, so the TC & clutch are both ok?