Search results

hi :) thanks for quick reply treworgey im pleased about that then and yes i know about pre load the bearings thanks again cheers andy

hi there right i try again it a 200 tdi on front axle,as i said i was doing the bearing, when i took the hub off which leaves the stub axle the drive shaft that goes thro it seemed to have a lot of play in side the stub axle if you understand me as in drive shaft can be moved up and down...

hi all:) been doing me bearings and notice when the drive shaft goes thro the stub axle they is play in it can any one tell me is this normal as i can move in the stub axle in all drictions andy

hi there when my clutch went i asked around on here for advise and opp for engine way as in lifting and pulling engine forward it give me plenty of room to spin it and do the work without spending to much time on me back,and messing me interor up.also it also helps in seperating the top...

hi all,:) thanks for repleys, well tell them it just standard hopefully i not hear nothin else from them cheers :D

hi all,:) ive just takem out an insurance policey with sure term who are using equity star as my underwriter,anyway i got a letter from them asking if my alarm imnboliser is thatchem approved.as i dont know would anybody out there happen to know what landrover actually fitted to there...

hi all swivel bearings you say to, would it be advisery then to change these at the same time as a cv joint.also can these be changed with the big ball inplace on axle many thanks again for repleys

hi there :) should this of been picked up on the mot i had 2 weeks ago even then there was no adveriess neither on the front end even then iv only done 70 miles roughly since andy

hi is there away of checking if the cv joint is worn when the car is stationary thanks again

hi thanks for quick repley forgot to mention its a 200tdi on a 92, andy

hi everyone,:) been awhile since i posted out but here goes,car passed mot 2 weeks ago and everything was fine till last week.i notice going round corners car has a knocking sound on steering lock weather it was left or right turn.anyway to day i had to use diff lock as i was stuck in snow on...

hi there sorry about not getting back to u but yes thats the panel i eventually had ago of making one as i couldnt find any infor on those but cheers for repely

hi all, :) just been under car checking out what needs welding and come across this panel badley corrided so mange to pull it off.sorry no pic but i describe it as best i can. it on front passenger side below there feet and just infront of the body to chassis mount it about 9" long and vertical...

i like the ideas everyone :) but i think i wait for a dry day even tho i got a fair bit to do, but it aint half tempting as im missing the the landy (no mot) so useing bike at min cheers all for advise again.

well with all the rain it very tempting to go out with me gear but i know water and electric not go together so i just got me thinking how do garges do it after driving in the rain when disco dripping thanks for repley tho

hi all right i know water and electric does not go together but when its stopped raining is it possible to weld with mig with rain droplets on bonnet. just that ive been thinking what do garages do when u take motors in for welding work after driving in the rain. intresting to hear...

hi all:) right here goes i got a split body mounting which needs doing for mot.now ive looked about but can only come up with rear,so question anyone know if these are available its for a mk1 discovery cheers in advance

hi all :) just had a clutch fitted to my 200 tdi discovery 92 plate.this was done with the engine out and everythin in side was replaced,but since this has been done i have a vibration going from the front of the car to the front seats and its felt through the floor and espcially on the...

hi all :) anyone know the size of the copper washers on the fuel filter housing as mine are leaking many thanks :mad: