Search results

changed engine oil and filter :)

Hi Rob you may be on right track, Iv had / got similar knock clunky noise when turning lock to lock, my noise seamed to off side front iv changed that side mount and my clunk noise is quieter and moved to near side now haven't got round to fitting that side top mount yet

have seen these door mouldings on eBay a few times and they go for a fair bit of dosh

ya like the arches and the colour but the rib bits are a bit too much

I think its anti clock wise from memory I sure you can only turn it one way and pull towards you refitting is opposite push in slightly turned then turn straight to lock it back in. and yes the rod just hooks on a little peg sticking out from clutch peddle mine came off so easy not sure how it...

Hi dog-man If you disconnect the push rod from the peddle (push sideways towards the centre console),Then go to the engine bay and get hold of the master cylinder give it a 1/4 turn this will disconnect it from the bulk head, then u can trim it with a junior hack saw on top of the engine be...

As Nodge said a clutch will last a lot longer than 30,000 miles, trimming the plastic shroud helps if you have a low bite point. It also helps bleed the clutch properly with the extra travel. Do you know if the master cylinder was changed with the clutch.

could be some thing simple as wheels need balancing

My clutch was changed as a matter of cause as I had to have new gear box, and was replaced with genuine LUK clutch kit and then changed the master with a luk master and still ended up with a very low bit point. it was bled a couple of times, my little ''mod'' (bodge):) has helped know end it's...

here's the thread on trimming the plastic on the end of master only takes 5 mins to do really help mine https://www.landyzone.co.uk/land-rover/clutch-low-bite-point-again.316351/

wish I fixed mine in the summer never mind fitting the remote :(

have a little look here this may be what your after there are others like this search 2 channel dash cam...

I'd rather have a well cared for td4 with a lot of miles on her, than a lower mileage td4 that hasn't

Hi have a look here it will give you a good idea what's involved

O dear we have all been there m8, never had the pleasure of fitting one so carn't off any advice with mine I had the 3 amigos as soon as pressed ''buy it now'' for the up grade brake switch they disappeared

fixed my broken heated screen turn out to burn out relay :) nice easy fix when u know where to look

fixed it :) burn't out relay nice easy fix once I knew where it was

me neither but I am often fcuking kitchen appliances

u may want to send a PM as well don't think he always get his alerts for this thread

Hi Nodge68 I think NeilTD4 has got a tread on here '' For sale 5 years worth of 2004 freelander 1 td4 parts'' im sure he's listed a HP pump which he thinks may have been rebuilt, I've had several bits off him all been excellent