Search results

Thanks, everyone, for your replies. I'm encouraged to DIY the task. :)

Is there a special tool required to centralise the clutch before tightening the mounting bolts?

Might anyone give me some idea how much a clutch & slave replacement might cost? And how long it might take? Has anyone had this done recently? Thanks everyone. Oh, my FL1 is a 2005 M47 model.

Thanks, Nodge. The level you quote amounts to similar to what I injected. Yes, I used a small syringe, 20mm x3.

Might anyone know how much oil the clutch reservoir takes to be full? Thanks.

Hi. The clutch failed on my TD4, discovering there was not enough oil in the small reservoir. Once topped-up it was fine. It didn't need bleeding. My question is? What is the capacity of this minuscule reservoir and why has it got such a large rubber insert on the lid? Surely this...

Hi all. I removed the HP Fuel Pump regulator, replacing the 2 seals ( a rubber & plastic). They worked but was left with a slight fuel leak, which I thought was from the regulator's gasket. It turned out to be the return fuel line from the injectors where it joins onto the metal pipe above the...

Thanks. I followed your instructions and tightened the 2 bolts. they were a bit rusty but once removed, lubed and tightened it worked.

I have a problem with my 2005 Td4. The rear door glass seems loose, to the point where it catches the plastic framework as the door closes, before automatically rising to complete a seal. The glass is prevented from motioning upwards to complete its movement because it comes into contact with...

Thanks everyone. Sorry for not replying sooner. I've replaced both disks and pads with new. Greased all moving parts as well. The calipers were replaced with new a couple of years ago. So far, they are working well. There was nuttin obvious though. I'm guessing poor quality pads. Got them of...

Hi. i'm new to this Forum, and ask for advice. My FL1 Td4's (2005) front brakes were giving a real graunching/crunching sound about 2 years ago, when braking. I replaced the pads, hoses and the calipers, along with the fluid. Everything looked okay, by the way. And all has been well, until now...

No. You haven't answered my question ans rhe fact it might not pass an itv is itrelev3nt. My question still stands. All im asking for is the possible chance of a seat teplacement and not a legal thing. I heard this group could be useful, and also learned there woukd be useless answers. Please, i...

I don't know. However, having watched the ITV guys they wouldn't know the difference. Also, I saw another old Hymer with leathger seats from a Land Rover, and his was never questioned. I lost touch with him though. Regrdless though, I wioulod still like a set of front seats.

Hi everyone. I have a Hymer (1992 B534) Motorhome and my two front seats (driver & Passenger) need replacing. The mechanisms are okay, but the padding & material have been chewed to death by dogs. Their fitment is by 4 bolts on each seat, one in each corner. The front bolts are approx 31.5 cm...