Search results

Can't be done all you will do is **** the pump. The pump is controlled by the EDC ECU. You have few choices on what you can do for more power. Start with blanking of the EGR valve Remove the catalytic converter. Clean out the inlet manifold and intercooler. It will change it a lot Or get...

For. The love of all you hold dear make this a sticky lol

What he said learnd that the hard way then got a real one the second time round.

It helps to have one. its the rear cross member, front bulkhead are the main rot areas on them, if you get one that is well serviced and regularly wax coated it should be ok.

I have the one from the OP. It is a good winch for the money. It is not grate for lots of recovers and there are improvements it needs. I replaced the solenoid with an Albright one. I have taken it apart and greased it properly as it was a bit lacking there. I removed the wire rope and put on...

Welcome and you have come to the right place. If you spend about 20 min looking around the forum and use the search function you will find all you need. There a section dedicated to defenders.

Hmmmmmmm I asked this Can you tell me if this will need a vic test and Q plated as it has had a lot of changes. And I don't think it will have enough points to retain its original reg. don't fancy getting screwed by the dvla. Got this as an answer Dear never have we done vic test on...

I had a simmiler problem a few years back. I removed the door card gave every part of the mechanism good blast of wd40 and 3in1 oil and that fixed it. I would give that a try first saves pulling everything out of the door.

I would have it bang it on a trailer and use it as a toy though. But I have sent a question to him asking about the state of its VIC test don't hold much hope for it ever having had one though

Looks like a no for me as the wife has got to work. Frigging NHS

Well I'll Speak to the long haired boss and let you know by 12 tomorrow.

WTF vauxhall badges on a land rover that is just criminal.

Ok now I know I'll be going to move back up north next year.

Ok I know where you are now. I know the area well as my dad lives in Montrose.

Lunan bay then, wonderful beach that is.

I did that to the back of my 100" when I last did that lain. It was pritty tricky about 5 years ago when I lived in Bordon.

I wonder.. if that is the chassis from that black ranger rover,, that keeps doing the rounds and some one has went **** it and broke it up.

Ouch but that is water lain for you close as fook sunken road.

Here is a pic of the mount for a wolf on the roll cage With the hard top FFR variant it is still mounted in the same location then the hole is sealed. Having driven them a lot it has never been a problem where it is located.

Ok to get more power from an EDC you have a few options. Here is what I did. Started with 114bhp after a rolling road test. It has a larger intercooler from allard. The head has the inlets and exaust ports polished I did this as the head Gasket was needing doing and the head was off so...