Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. ian mitchell

    Disco 3 (LR3) gearbox breather question

    thankyou for your replies at least i know it has been done and i don`t have to worry about it,just the hand brake squeal to sort now. has had all new discs and pads plus h/hrake shoes before i acquired it ,have done the auto set up with my icarsoft but it still squeals.
  2. ian mitchell

    Disco 3 (LR3) gearbox breather question

    sorry to sound ignorant but i didn`t know it had had a servo update ,apart from changing filters and hitting the pre heater with a hammer to make it work i haven`t done anything else under the bonnet, will have been previous owners .they did some jobs and just left others. the more expensive...
  3. ian mitchell

    Disco 3 (LR3) gearbox breather question

    Found these i did have some black plastic pipe but have misplaced it so will have to be yellow for now .and thanks for your time and expert knowledge as allways.and would like to see piccies when you have finished, {if we ever finish when owning a landrover:rolleyes:.
  4. ian mitchell

    Disco 3 (LR3) gearbox breather question

    you can waffle all you like sir, if it helps me and saves me money in the long run then you are being a great help. and referencing to the 6mm stem elbows i am sure i have some in my box of airline spares, will have a look later. and cheers for your replies they are very much appreciated.
  5. ian mitchell

    Disco 3 (LR3) gearbox breather question

    Thanks for your reply i will have a look for something and would it beneficial to put a filter on the end. Or is it not that important thanks.
  6. ian mitchell

    Disco 3 (LR3) gearbox breather question

    finally figured how to post photos i think sorry for the delay in getting back to you mr stuart:)
  7. ian mitchell

    Other what have u done on ur disco today

    just cleaned up the rear of the nearside sill. thick with mud behind the plastic trim and started to rust on the edge of the wheel arch.might just last a bit longer.
  8. ian mitchell

    Disco 3 (LR3) gearbox breather question

    thanks for that will have a go ,cheers.
  9. ian mitchell

    Disco 3 (LR3) gearbox breather question

    i have a picture of the pipe just don`t know how to upload it yet:(
  10. ian mitchell

    Disco 3 (LR3) gearbox breather question

    cheers gstuart i can`t seem to find a bracket,to fasten the pipe to so may have to tie tag it out of the way somewhere. but thanks for your reply it is very much appreciated.
  11. ian mitchell

    Disco 3 (LR3) gearbox breather question

    hi wondered if anyone could help? does anybody know if transmission breather on d3 manual just sticks up the front of bulkhead,had oil leaking into engine undertray and found the breather pipe hanging down side of engine and oil running out. oil was clean but quite thin, end of rubber pipe was...
  12. ian mitchell

    Other what have u done on ur disco today

    looked at it, too busy decorating to do anything with it.:(
  13. ian mitchell

    Intermittent lag / vibration _discovery 3

    mine was front propshaft.
  14. ian mitchell

    Other what have u done on ur disco today

    i just changed gas struts on tailgate,at least it doesn`t hit the wife on the head anymore:p.
  15. ian mitchell

    Other what have u done on ur disco today

    thanks.as i said never done it before,but its very windy here in sunny bradford.
  16. ian mitchell

    Other what have u done on ur disco today

    recovered the two outside a post plastic trims that blew off in the wind, never done it before:confused:
  17. ian mitchell

    Disco 3 (LR3) propshaft.

    hi, update on the disco, turns out it was front prop:D result. and thanks everybody for your replies. hi my fl2 was ok,but nobody could find cause of battery drain.also no matter the make of tyres i put on it didn`t like snow it didn`t handle very well,i prefered the fl1 but couldn`t find a...
  18. ian mitchell

    Disco 3 (LR3) propshaft.

    i checked the front prop when i checked the driveshaft ,there was slight play when twisting it but nothing major,my fl2 was the same and that ran fine.it was the driveshaft that had play thats why i bought one,only had it six weeks and i want to burn it already.
  19. ian mitchell

    Disco 3 (LR3) propshaft.

    no i was just taking their word for it.
  20. ian mitchell

    Disco 3 (LR3) propshaft.

    it came from ebay ,can you send it back with no reason or do i just make an excuse.
Back
Top