British Leyland Rover
Active Member
- Posts
- 117
Good evening, does anyone have a source for one of these? There's some UK Made ones on ebay for MG's and that's all I can find.
Thank you.
Thank you.
Series 3 2.25 PCV diaphragm
- Thread starter British Leyland Rover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Wildefalcon
Well-Known Member
- Posts
- 1,932
Which engine is this for?
British Leyland Rover
Active Member
- Posts
- 117
Sorry it's a 2.25 petrol
Wildefalcon
Well-Known Member
- Posts
- 1,932
Swiss? Or late emissions control engine. Most have a simple breather to atmosphere. Got any photos, curious!
British Leyland Rover
Active Member
- Posts
- 117
British Leyland Rover
Active Member
- Posts
- 117
British Leyland Rover
Active Member
- Posts
- 117
I was going to try one of these.
27H7758 - PCV Valve Diaphragm OEM Quality (Made in the UK) | eBay UK
27H7758 – PCV Valve Diaphragm. Sprite & Midget from 1963 – 1974. ALL 18GA-GD ENGINE PREFIXES.
www.ebay.co.uk
Wildefalcon
Well-Known Member
- Posts
- 1,932
Not standard fitment in the UK! Interesting. Thanks for sharing.
mystery
Well-Known Member
- Posts
- 1,569
- Location
- BULKINGTON
British Leyland Rover
Active Member
- Posts
- 117
Thankyou mystery, mystery solved!
I'm surprised no one sells a replacement for series landrovers. I'm sure the rubber diaphragm deteriorates above the hot manifold and can cause running issues.
I'll take mine apart and inspect. I've ordered the 3 emissions hoses, im sure mine has been leaking air.
I'm surprised no one sells a replacement for series landrovers. I'm sure the rubber diaphragm deteriorates above the hot manifold and can cause running issues.
I'll take mine apart and inspect. I've ordered the 3 emissions hoses, im sure mine has been leaking air.
Attachments
Last edited:
British Leyland Rover
Active Member
- Posts
- 117
Sure enough the diaphragm has a small tear.
mystery
Well-Known Member
- Posts
- 1,569
- Location
- BULKINGTON
not a fan of that size of jubilee clamp prefer the two wire type the jubilee clamps tend to distort the rubber hoses you can get smaller thinner jubilees that would fit better or the correct sized modern spring tensioned clamps ,be careful when cleaning the spring so as not to stretch it as this will affect it's operation
Attachments
Similar threads
Freelander 2 (LR2)
PCV
