td5 clutch recommendations

japexup · Apr 13, 2025

hi guys just removed the gearbox to change the spigot bearing but its ok bugger, my question is any recommendations for the clutch its still has the original set in (date stamp confirms ) plus rear crank seal its absolutely bone dry and looks new but would you change it anyway as ive heard the sump is a pain to re seal

thanks john

miktdish · Apr 13, 2025

If it's not the spigot bearing what was making the noise that made you think it was ?

japexup · Apr 13, 2025

all the signs pointed to the spigot it only makes a noise when stationary in gear with the cutch in soon as you move off it stops and is perfect when driving

john

Anaconda · Apr 13, 2025

I wouldn't change a seal which wasn't leaking.

Kev12 · Apr 13, 2025

That will be the release bearing, not the spigot

japexup · Monday at 11:04

well bit the bullet and purchased full LOF power clutch kit including new dual mass flywheel was a absolute pig to fit ,all back together but now it wont disengage have bled slave repeatedly so now going to change it for a new one and try again am sure it all went together correctly (plate right way round) so hopefully it sorts it if not all got to come to bits again and figure out whats wrong

KISSMYAURA · Monday at 14:16

lof are the nutz

td5 clutch recommendations

japexup

New Member

miktdish

Guns n Chainsaws

japexup

New Member

Anaconda

Well-Known Member

Kev12

Well-Known Member

japexup

New Member

Attachments

KISSMYAURA

Well-Known Member

Similar threads