What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Philgt50 said:
Will look out 👍
Click to expand...
It’s my son’s and it’s basically killed me over last 8 weeks !
Need a few bits and bobs so if you do get one let me know and I sort the post out cheers
 

Attachments

  • IMG_3669.jpeg
    IMG_3669.jpeg
    601.3 KB · Views: 28
Had a day out on the banks of Loch Awe. On the trip there I became aware of a new noise; a sort of muted howl, unable to determine front or rear, drivers side or passengers side. Noise the same regardless of gear or on the overrun, so unlikely to be gearbox.
Coming home the noise returned, this time with a slight 'buzz' through the steering wheel. Both noise and 'buzz' goes away on left hand bends, returning on the straight and stays on right handers, so (hopefully) not the haldex or diff.
Looks like a front wheel bearing on the way out. 🙁
Only done 237,357 miles, dammit.
 
Rank Amatuer said:
Had a day out on the banks of Loch Awe. On the trip there I became aware of a new noise; a sort of muted howl, unable to determine front or rear, drivers side or passengers side. Noise the same regardless of gear or on the overrun, so unlikely to be gearbox.
Coming home the noise returned, this time with a slight 'buzz' through the steering wheel. Both noise and 'buzz' goes away on left hand bends, returning on the straight and stays on right handers, so (hopefully) not the haldex or diff.
Looks like a front wheel bearing on the way out. 🙁
Only done 237,357 miles, dammit.
Click to expand...
Get the terms of the LR warranty checked! Shocking
 
Freddie17 said:
Switched out the RH upper engine mount insulator for a nice shiny new LR one.
It’s oil(?) filled, and was flagged as suspect whilst having some work done the other week. Sure enough, it was leaking when I got it out.
Think the tie-bar rubber is on the way too, so new one being ordered.



View attachment 338805
Click to expand...

Shiny bit fitted, so RH mount and insulator is now fully replaced.
I’m sure there is still a very faint ‘wobble’ / ‘oscillation’ coming through in 1st and 2nd, in the higher revs, but only under hard acceleration (so high revs but low ish speed). It’s coming from somewhere that I’ve yet to find 🤔

The only other possibilities now would be the lower LH mount, or the last ‘old’ driveshaft (O/S), which could have caught some damage after I wrestled it in and out in a spanner-throwing afternoon doing the suspension last month I guess 🤪

1745349564602.jpeg
 
kernowsvenski said:
That looks like a splendid, well organised, clean, well stocked garage. The stuff of dreams for me in my penthouse flat with an on-street parking space.
Click to expand...
You wouldn’t say that if you saw the rest of it 😂

… when we first moved here, I could actually fit a car in it. No chance now!
But yes, it’s nice to clean it up and have a sort out every now and then. TBH, I got all the tool chests 2nd hand off flea-bay over a 12 month period for peanuts. Just tidied the dents, greased the drawer runners and rattle-canned them. Well chuffed with the results.
 
htr said:
That’s one of the laws of the Universe: Crap expands at an inversely proportional rate to the space made available for its retention.
Click to expand...

Along with the formula for the availability of a 10mm spanner in your shed/garage/toolbox at any given time;
n-1
Where n = the amount of 10mm spanner’s you have bought
 
Freddie17 said:
Along with the formula for the availability of a 10mm spanner in your shed/garage/toolbox at any given time;
n-1
Where n = the amount of 10mm spanner’s you have bought
Click to expand...
I have that problem with 17mm spanners, which never seem to be available, dispite having 1/2 a dozen of them somewhere.
 
You must log in or register to reply here.

Similar threads

N
Freelander 1 I have a freelander currently on a Caribbean island with a bad rear diff . can i delete the rwd --looking to convert my freelander to 2wd front wheel
Replies
6
Views
712
Philgt50
Philgt50
htr
Freelander 1 Poor Radio reception...
Replies
7
Views
598
Dippypud
Dippypud
T
Help!
Replies
13
Views
1K
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
771
Freddie17
Freddie17
F
Freelander 1 Rear fog lights not working?!
Replies
4
Views
371
freelanderguy99
F
Back
Top