Freelander 1 Freelander prop bearings replacement td4

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Barnview104

Member
Posts
58
Location
Kent.
Hi all
Just changing prop shaft bearings on my freelander td4 and am struggling to undo ther rear prop shaft bolts to the diff.
Have correct star socket and spanner bit very very tight .
any ideas to help ?
Thanks
 
Can I not turn the prop.shaft while under motor to get to the top bolts ?
Nit surr if that possible but she is up.on axle stands at mo you see
 
It will be now !!
3 wheels are up so just the fourth to jack up and put stands under
Do I have her in park or drive to remove bolts?
Thanks
 
It will be now !!
3 wheels are up so just the fourth to jack up and put stands under
Do I have her in park or drive to remove bolts?
Thanks
I'm lucky to have an inspection pit, so can just roll the car forward a bit.

A lot more room to work in and safer to... unless you kneel down on the dried leaves in the bottom of the pit and a 100 hedgehog spines stick in your knee! That fookin hurt.

HippoRamps are a good option to. Google is your friend for next time.
 
And there will be a Next Time !

How long depends in what make bearings you have bought. £20 off ebay will be 3 to 6 months. FAG or SKN will be 5 years ish
.
 
I have noticed that original equipment, if it lasts then it lasts well. Our 2000 model has all original bushes and ball joints. 60k miles but 24 years old. New 'rubber' whatever it is made off seems to disintegrate before you've tightened the bolts up.
 
I have noticed that original equipment, if it lasts then it lasts well. Our 2000 model has all original bushes and ball joints. 60k miles but 24 years old. New 'rubber' whatever it is made off seems to disintegrate before you've tightened the bolts up.
I always use OEM parts, or sometimes genuine, but none of them seem to last like the original parts
 
Back
Top