GM 5 gearbox

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

scotrock

Member
Posts
12
Location
Elgin
Hi All,
It been sometime since been on the site. Any way this weekend had the RR out for a drive only got a short distance went there was a crack then lost all drive. Pulled up quickly had a look under it no bits hang down so tried putting in drive but just got a noise that sounded like a disconnected driveshaft but there isn't one. When I put it to P you hear what I can only describe as rubber being twisted which lasts for about 15 secs. Does anyone know if this is the gearbox failed or is it the TQ I haven't been able to look at it as have had to return to work. There was no failure notice on the dash although it does bring up select neutral now and again. Hope you can help its on a 2004 L322 vogue se. Cheers Rod
 
A quick check under at props first, Ok they don’t drop off but the CVs on the props have been known to spin on the splines. Also worth checking you have had this upgrade done.

Put it in gear and see if anything is spinning underneath. ( use a mirror or video it on a selfie stick)
If not then yes it’s time to explore the transfer box and gearbox.
Have you got any diagnostics you can plug in, it may have a fault logged.

Although I don’t know what to say about your putting in P description.

J
 

Attachments

  • Safari - 16 Mar 2019 at 16:50.pdf
    1.2 MB · Views: 76
Would assume its a td6 as you put Gm 5 box, they are not known for there strength there have been loads of threads on here about them unfortunately.
do you know any history on the box has i had oil change whats the mileage.
Have a search of threads by Bemble he is the gearbox god.
 
brianp38dse said:
Would assume its a td6 as you put Gm 5 box, they are not known for there strength there have been loads of threads on here about them unfortunately.
do you know any history on the box has i had oil change whats the mileage.
Have a search of threads by Bemble he is the gearbox god.
Click to expand...
They are such a weak gearbox I don't think he gets involved with them.
 
I concur with marjon. Could be a propshaft or a driveshaft issue, particularly if the vehicle missed the Q041 Service Action. If it is, the output shaft will be rotating when Park is selected and the parking pawl will ratchet over the teeth, making a noise.

Frontsplinefailure_zps873af822.jpg

Front propshaft issue

80074-FrontDriveshaftdisconnected_zps2e6956fe.jpg

Driveshaft issue

Phil
 
marjon said:
A quick check under at props first, Ok they don’t drop off but the CVs on the props have been known to spin on the splines. Also worth checking you have had this upgrade done.

Put it in gear and see if anything is spinning underneath. ( use a mirror or video it on a selfie stick)
If not then yes it’s time to explore the transfer box and gearbox.
Have you got any diagnostics you can plug in, it may have a fault logged.

Although I don’t know what to say about your putting in P description.

J
Click to expand...
Hi thanks for your reply I will do as you have said and yes I have diagnostics and will see if anything has been logged. Cheers Rod
 
brianp38dse said:
Would assume its a td6 as you put Gm 5 box, they are not known for there strength there have been loads of threads on here about them unfortunately.
do you know any history on the box has i had oil change whats the mileage.
Have a search of threads by Bemble he is the gearbox god.
Click to expand...
 
Hi Brian thanks for your comments the RR has only done 81k as when I bought it it had been in storage for 3 years so I would think it has never had an oil service on the gearbox.
 
Bemble said:
I concur with marjon. Could be a propshaft or a driveshaft issue, particularly if the vehicle missed the Q041 Service Action. If it is, the output shaft will be rotating when Park is selected and the parking pawl will ratchet over the teeth, making a noise.

Frontsplinefailure_zps873af822.jpg

Front propshaft issue

80074-FrontDriveshaftdisconnected_zps2e6956fe.jpg

Driveshaft issue

Phil
Click to expand...
 
Hi Phil, thank you for sending that info I will take a look once am back home. I think this RR would not have had the Q041 done to it as it was in storage for sometime before I got it. I will let you know how I get on once I check it out. Thanks Rod
 
marjon said:
A quick check under at props first, Ok they don’t drop off but the CVs on the props have been known to spin on the splines. Also worth checking you have had this upgrade done.

Put it in gear and see if anything is spinning underneath. ( use a mirror or video it on a selfie stick)
If not then yes it’s time to explore the transfer box and gearbox.
Have you got any diagnostics you can plug in, it may have a fault logged.

Although I don’t know what to say about your putting in P description.

J
Click to expand...
 
Hi Marjon, thanks for you comments I will do as you have suggested and will put the diagnostics on to it and see if its logged. Cheers Rod
 
You must log in or register to reply here.

Similar threads

T
L322 Gearbox shifting problems
Replies
10
Views
936
TrustyBib
T
MrGorsky
P38A Rattle when in gear and foot on brake...(SOLVED)
2
Replies
22
Views
2K
Flossie
Flossie
B
L322 Range Rover l322 gearbox issue
2
Replies
24
Views
3K
rich28uk
rich28uk
tarphenry
p38 diesel
Replies
15
Views
595
tarphenry
tarphenry
D
L322 TD6 gearbox problems
Replies
17
Views
2K
Tootzoo
Tootzoo
Back
Top