Noisey injectors?? 300TDi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I reckon you have a cylinder there not doing its fair share of the work.
It almost sounds to me like its backfiring through the air filter?
Have you removed the filter and stuck your ear for a listen?
Have you removed the rocker cover and checked the valve clearances? Im not sure if the 300s run the vlave lash caps same as the 200? and if they do the 200 are always spitting them out and the valve clearance goes from 0.20mm to 3.0mm.

Ebay LJC100270 to see what Im talking about
Will have a listen at the air filter tonight. I’ve already done the valve clearance but will also double check that tonight. Cheers
 
If you carefully go around the manifold with your hand [ do just after starting while motor is coldest ] you should be able to feel a leak, at the front or rear is most common place for them to go_Or if you get someone to start engine while you watch that area you will see a puff of black smoke from the start up system.
 
If you carefully go around the manifold with your hand [ do just after starting while motor is coldest ] you should be able to feel a leak, at the front or rear is most common place for them to go_Or if you get someone to start engine while you watch that area you will see a puff of black smoke from the start up system.
Sounds like a good plan, will try after work later cheers
 
Back
Top