Front Mudflaps

Could somebody put up the size of a Front Mudflap please. Reason why is that my back flaps don't stick out far enough and so they splash mud!. I've ordered a new set of rears, going to set them out further than those on at present, and going to use the back rubbers as fronts. I've ordered a set of front brackets 'cause I haven't anything there at all at the moment. Thanks.....

I'd strongly recommend buying a sheet of 3mm rubber and making your own - it's easy to make them big enough to go up into the wheelarches, which will protect your front outriggers and floors

Gwyn Lewis makes a protection set if you dont want to do your own. I did what Zeaphod recomends 20 years ago on my 90 an still have original outriggers and footwells.

Aldi have heavy duty rubber floor mats, so why not do as I did and make your own?

Those rears should be hanging of the rear cross member

I would reposition the rear ones, they are too far inboard, they need bringing out so wheel is covered.
Your cross member is the cutaway type which makes them hard to fit correctly.

Fit flaps on the rear so they cover and protect the crossmember from crud.

flat said:

Those rears should be hanging of the rear cross member

Click to expand...

Not on a 110, they sit further forward.
Mine did anyway.

flat said:

Those rears should be hanging of the rear cross member

Click to expand...

Yep, sorry, should have said it's a 110.....

Scooby22 said:

I would reposition the rear ones, they are too far inboard, they need bringing out so wheel is covered.
Your cross member is the cutaway type which makes them hard to fit correctly.

Click to expand...

Yep, that's what I intend to do, they were fitted by previous owner. You can see how far in they're fitted. And I've none on the front at all,at all.....

David Leech said:

Yep, sorry, should have said it's a 110.....

Click to expand...

Aah got you. Sorry

Got the rears fitted!.....