sparkysbandit
Active Member
- Posts
- 360
- Location
- Newcastle upon tyne
Can I swap the passenger seat for the drivers seat
If so how easy is it
If so how easy is it
front seats
- Thread starter sparkysbandit
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152
Well-Known Member
- Posts
- 9,134
- Location
- South London/North Kent
What for? Same seat.
Depends if they have left and right controls.
Should be easy 2 hour job if that.
Depends if they have left and right controls.
Should be easy 2 hour job if that.
sparkysbandit
Active Member
- Posts
- 360
- Location
- Newcastle upon tyne
My driver seat is wearing and I wondered if I could swap it for the paasenger seat
There is no electrics
They do have manual controls for adjustment, but im sure there would be enough room to use them still.
nickcc
Well-Known Member
- Posts
- 2,634
- Location
- Helston Cornwall
My drivers seat also has the lumber adjustment but the passenger seat doesn't.
sparkysbandit
Active Member
- Posts
- 360
- Location
- Newcastle upon tyne
I dont think mine has pre tensioners....I cant see any electrics
But I dont mind being wrong if someone knows different
But I dont mind being wrong if someone knows different
sparkysbandit
Active Member
- Posts
- 360
- Location
- Newcastle upon tyne
Anyone else any ideas?
Or has this been done before?
Or has this been done before?
hiya,
when i converted my commercial 3 door into having a full interior, i looked into all of this , as one breaker had a nice set of front seats but they were both passenger seats, but didnt do it as the seat belts brackets, and the lever to put the seats forward were all on the wrong side, and without taking the seat covers off wouldnt know if indeed the bolts were behind the covers etc , but i expect youve looked into that
hope im not telling u how to suck eggs but have u thought about seat covers etc until a suitable seat comes up,
not sure also if they have the same frames or indeed if they are angled differently
as also if u tried to swap over sides the covers would also be wrong, having to making a hole etc, or taking the covers off both seats in order to try and match them up,
could u do a swap on ebay etc,
hope u didnt mind me suggesting it but seems abit of a nightmare with what your trying to achieve at the end of the day etc and hope that doesnt come across as disrespectful
gary
when i converted my commercial 3 door into having a full interior, i looked into all of this , as one breaker had a nice set of front seats but they were both passenger seats, but didnt do it as the seat belts brackets, and the lever to put the seats forward were all on the wrong side, and without taking the seat covers off wouldnt know if indeed the bolts were behind the covers etc , but i expect youve looked into that
hope im not telling u how to suck eggs but have u thought about seat covers etc until a suitable seat comes up,
not sure also if they have the same frames or indeed if they are angled differently
as also if u tried to swap over sides the covers would also be wrong, having to making a hole etc, or taking the covers off both seats in order to try and match them up,
could u do a swap on ebay etc,
hope u didnt mind me suggesting it but seems abit of a nightmare with what your trying to achieve at the end of the day etc and hope that doesnt come across as disrespectful
gary
richijones
Member
- Posts
- 64
- Location
- Huddersfield
I would agree that seat covers or a set of seats from a breaker would be the simple option.
Bye the way can anyone recommend a good supplier of seat covers that will look ok on a 3 door, concerned that some of the universal ones on e-bay may be a poor fit and look crap
Bye the way can anyone recommend a good supplier of seat covers that will look ok on a 3 door, concerned that some of the universal ones on e-bay may be a poor fit and look crap
Last edited:
Similar threads
Freelander 2 (LR2)
Seats?
