Recent content by zebcrs

I still have some reversing on the connections to blend motors left. Most of the frontpanel software is done.As soon as all is soldered in I can do the analog to digital readings and tweak the drivers to stop at the correct positions. When it works "ok" I will do the pcb's profesionally so it...

Doesn't anyone know anything about the splines on the L322? The P38 splines I can just go out and measure but I would like to know the L322 ones before I buy a steering wheel. If the 322 splines have large diameter I can make an adapter i the cnc. If not The steering whell has to be modified. It...

Actually we are working on some replacement software for the BECm to get rid of alarm system and being able to use another plip for the doors :-) I am located just north of Oslo in Norway. We are a bunch of old computer hackers that have grown old and find fun in old car stuff instead:-)

I am doing my own EAS system with all corners inependent and faster to match the Arnott Gen3 system better. Nice to have some new functions too:-) As the old system was worn out.

Hmm,usb charging socket was a good idea !! :-) Yes if I do bulk at 10 I can get reasonable prices.

The display is to slow to support live camera feed :-( And it would be to low in the dash anyways.

Yes, I was planning to to a refurbish model. I have 12 old Hevacs in stock. The EAS diagnostic part will only work against my EAS module.

The whole kit would end up at around 100£. That is for front plastics,pcb's with new buttons,arduino and display. Fully mounted I would charge 150£. The assembly requires some smd soldering/desoldering.

I am in the middle of programming. I will start selling upgrade kits some time during summer. I just have to do the button/led pcb's and not just veroboards as in the test version.

Here is some info and stuff on my Hevac panel project. Since a lot of Hevac displays and fan buttons don't work very well after over 10 years in service I decided to make a new one. I traced all signals on the main board and scrapped the front panel and mainbaord cpu. It is now replaced with...

I put it in ! :-) M57 with manual gearbox. The P38 should have had that engine from the beginning. I just love the torque and the smooth run. It was a LOT of work though. Still has some instrument issues but they are on the way of being solved now. I am debugging the can bus between the DDE4...

Has anyone fitted a L322 steering wheel on a P38 ? What is the difference in splines? Since I have a M57 engine in mine I need the crusie control buttons and I would love the heated option as well but that might be a problem due to the massive power drawn by the heater versus the thin cabling...

Hehe Yes, they are from the early stoneage !!! But there still might be someone that reads this and actually has the pinout and knows the resistor value from the red connector. The green one would also be nice to have the info from. I have now finally found out how to get the T4 up and...

Anyone who has some cable info on the multi cable Phil has made here? Or just info on the RED cable as I need the red cable. I am just trying to build me my own multi cable with switchable "colors"