Recent content by wofforduk

Bought some proper cobalt drills yesterday, borrowed an angle drill and went for it. Seems to have worked, couldnt get all the old stud out but it tapped up back to 8mm fine, so sod it! :) Milled up the manufold, and now all sorta fits together! will see if it holds up over time. interesting...

After having this guy not turning up, and starting to desperately need the car back on the road, i am going to have a go at removing them myself. if i really bugger it up, theres a recon head on ebay (skimmed - valves ground ect) for £150 so now im not too concearned. want to avoid a head off...

If i had the kit (mill) then id be more than happy to give it a go but the probability of me cocking it up vs cost of new head kinda puts me off doing it. the guy im taking it too might be able to do it without taking the head off. Yeah they have two inlet ports per cylinder, one either side...

Okay you two!! The injectors were sitting on the Cam cover which i had to remove to get to the exhaust manu below it. the soot patch was next to the exhaust manu. bad news for me. exhaust studs on no. 1 cylinder have broken off - this is where my ability stops - having it trailered to a...

just taken most of it apart tonight, seems i am going to have to remove the injectors to get to the exhaust maufold. does this seem correct? i have a sooty patch next to the main exhaust manu- telling me the gasket has blown i think! could be fun..

Cheers Saint Will be very handy! now, to attack the beast... :)

perfect thanks. plan is to check the simplist things first, like all the hoses and joins before removing it all!! could be a silly q but is there a haynes for this car? survived so far without one but can be helpful for certain ways of doing stuff!

sounds like it could be a turbo rebuild then... but needs to get fixed. i have heard as its an early model that the ecu doesnt care as much as the later for the EGR, heard of a independent LR mechanic. one way to find out i spose... lucky i have an all comms so can clear the fault if it...

Hi All, I thought id put up a quick post before i start dismantling everything, to see if anyone else has come across this prob! Basicaly, it sounds like i have an air leak when under heavy power, have blown a couple 90Deg rubber hoses (coming straight out of the turbo) which after a boy...