Recent content by Winjeel

When I gave my D2 a "splash" of about 4 litres, Shell tech. services said more than 2% petrol and you will blow the donk. Winjeel. D2, D4SE

I have done about 200K/kms on non-genuine and had no problems with the brakes or the 3M's. As to the security nut, they get mangled by people using rattle guns when refitting a wheel. There is enough meat on the nut to engage it with a good Stilson spanner, at least to undo it. Stilsons are not...

Changing the pads is straight forward, when you pull up the caliper dont let the ABS wire come under tension. Remember there are twin pistons on the front and you need to depress them both simultaneously, depress one only and the other will pop out. To remove the disc you need a 19mm socket and...

If there is fuel, is it possible that the security system is playing a role. Consider locking the vehicle then gaining entry by using the key combination and not the fob. You need to start the engine within 30 seconds of entry before it imobilizes again. Winjeel

I added petrol so could not blame wife. Shell told me more than 2% petrol was fatal to engine. I removed the offending material by disconnecting the outlet pipe at the fuel filter, fitted a temporary line to a drum and by turned on the ignition switch without turning the engine. Repeat this...

Mine is a '99 TD5 Auto, with 275k/kms on the dial. It is fitted with LPG which supplements the diesel with added power and improved economy. I recently noticed a reduction in power, most notable in cruise control as it changed down earlier, but overall not the power I was used to and reduced...

Stand by, I got the thumbnails to print. Thanks. Also got the roverparts site, it is headed "Atlantic British" on the list of sites on Google. Excellent site. Great price for shuttle kit. Winjeel

Very useful info Kingcarlos. Any chance that the thumbnails can be put up in a form that can be downloaded from this site. I tried but no joy. Tried the 'roverparts' site but ended up lost amongst the many. Winjeel

Do you have the correct order of events? Is the pipe being disconnected followed by the lights and drive problem and not the other way around? I have had A/T pipe failure with results like yours, that is the pipe blew then the lights etc. The A/T pipes system is not the best bit of engineering...

Thanks for the leads Pastmaster. Winjeel

Thanks Pastmaster. It is an auto. To amplify the circumstances: it starts well, all firing and pulls well from cold. As I live on a farm, we travel lightly down the access road for 500metres before hitting the public road and the hill. As there is no subsequent hill before reaching normal temp...

Have you found the cause of the wet carpets? Winjeel

If it is an electrical loom problem, replacements are available from British Motor Imports, who bring Land Rover parts into Australia. Very reliable operation. Winjeel.

My TD5 produces a rather loud vibration at 2150rpm when cold and pulling up a short hill near home. I was told it is characteristic of the breed but my informant could not say what causes it. Once warm the vibration is not repeated. The vehicle has done 275k/kms and has exhibited this trait...

Fellow Oz Disco driver, my suggestion is that there is something loose or chafed in the electricals. I have experienced a chafed wire loom to the auto gear box, with bad results. Before disembowelling the gear box get the loom checked for continuity. Winjeel