Recent content by Windy scotland
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
W
Set ordered and money saved. Thanks gor the link to identify them.
-
W
It's all good fun and I'm thick skinned not fat lol.
-
W
Good bit of info there thank you. I assume the price difference is between audible and non audible from the descriptions.
-
W
Discuss what the differences are or might be.lol
-
W
Afternoon all hope you can advise on this
110 Defender 2002 hard top with basic spec.
I need to replace the front seatbelts but find that when I search for td5 ones the price increases substantially. Why?
There's no dash warning lights or pretensioners etc so I'm wondering what the difference...
-
W
It's my understanding that nanocom can only talk to the ecu IF it is NOT already immobilised.
-
W
Just a quick update guys. I bought the 110 so lookout for more questions doon.
-
W
I wondered about Abs surely at 02 it would have been std? It's on my 03 disco.
-
W
Good morning everyone.
I currently run a disco2 but always hankered for a defender 110.
I have nanocom so all good on that front and a very strong electrical and mechanical background.
The question is does the td5 defender 02 plate only have ecu control on the engine.
What about a bcu or abs...
-
W
Hopefully it'll go well. I've already done all the loosening of bolts etc so should be quite straightforward on the strip down.
Been thinking a lot about the measuring. Maybe overthinking though lol. Time will tell.
-
W
Hi guys im about to embark tomorrow on a 1/2chassis replacement in my d2. I have a couple of concerns as follows.
I intend to support rear of vehicle by placing a support across the chassis from side to side just in front of the rear trailing arms. I concerned the body structure may droop after...
-
W
Does anyone know how long the slabs timer runs when the ign is turned off??
To clarify I had a flat battery. I thought Id do a drain check and found that after turnining everything off there was a current draw of around 1/2 an amp.
I've traced this to fuse 11 (30amp) in the engine bay. Remove...
-
-
W
A quickie question before I but but are the front and rear anti roll bar clamps for bushes the same between the ace and non ace bars ? With the bushes being different.
Thanks in advance.
-
W
Thanks for all the replies folks. I'll get on it at the weekend.