Recent content by tomke92z

Hi all! After some fun off-road all my coolant leaked and the engine got some temp. Turned out that one of the heater matrix endings is broken: Not sure how that happened but anyway - I need a new heater matrix. I tried to find some instructions on the web on how to replace it but no luck...

RRC from 1992.

Will a transfer case from RRC 3.9 V8 with automatic transmission fit into D1 200TDI with manual transmission? If so, what modifications need to be done?

Hi! I have a Disco 200TDI from 1992 and when I turn the blower on I hear the air blowing pretty strong somewhere on the right side of the car but there is little or no noise on the left side. And on the right side the air is blowing pretty nicely whereas on the left side almost no air is coming...

Hi, I started my RRC with 300tdi (manual pump) after a long break. The revs are too high and the car does not respond at all neither to gas pedal nor to the linkage at the pump. It's as if something is locked in one position. Is there some kind of pin near the pump that can give such an effect...

Hi all! My brother is swapping the engine in RRC from 1991 (model year is 1992 I think) from 3.9 V8 to 300TDI. There is one connector left from the old harness that we have no clue about - where it should go on what it is for. Any ideas?

Small update. You were right from the beginning - I should've bought another alternator ;) I changed the bearings and then realized that the rotor is touching the stator as it rotates... I will buy an alternator from 300TDI and do a swap. I heard it's just a matter of replacing the pulley. Thank...

This is an interesting part! I noticed that the winding has been broken by the voltage regulator. You can see the wear on it: But I don't really get why it happened. All the parts at the top of the alternator seem to be in place and in quite a good shape. I mean the bearings suck and I will...

Just one question out of curiosity. How could the winding break just like that? I guess it was soldered poorly?

I did the diode test with the alternator off and they seem to be fine - above 500 in one direction (multimeter's black wire touching alternator's B+ and multimeter's red wire touching alternator's body) and no value in the other direction (wires swapped).

True, that's the plan. I will solder the wire and let you know if it's charging now :)

True, the wiring doesn't look well. Thanks a lot for your help, I'm glad I got to it finally!

I can take it to a specialist but I was really hoping to do it by myself... Just for satisfaction :) I took out the alternator and opened it. I was pretty sure I have a Lucas alternator but turned out its Magneti Marelli. But it looks exactly like Lucas A127-65. Both producers did identical...

I did the test. And yes, the light came on! So the bulb is fine. Now why doesn't it come on normally? I also did a test of the diode pack as explained in the film below (starting at around 5:30). This tests whether the current flows in just one direction. In my case I did not disconnect the...

One more thing. Yesterday I noticed that the clock is slow. It's working but it's not showing the right time. And fuse nr 14 is the one responsible for, among others, the clock. I will have to take a look at the fuse box and the wires below the steering wheel. The thing is that I have some...