Recent content by tobysi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. tobysi

    Exhaust issues

    Hi, zeaphod I’m still having issues with this. Do you know the part number for the britpart exhaust you have on your 200tdi - or where you sourced it from? The exhaust shown above does go over the axle, however, it sticks out too far into the top of the mudflap (where the metal fixture for the...
  2. tobysi

    Rear Wiper motor wiring issues

    Hi all, I seem to have the original 4 pin rear wiper motor in my 90. Previous owner left it disconnected with only one of the connectors remaining. I went to connect the wires and am a bit confused. Here are some pictures, any help would be much appreciated.
  3. tobysi

    Rear Wiper Motor wiring issues.

    Hi all, I would appreciate it if someone could help me work out which wire goes where! Below are some pictures, thanks in advance.
  4. tobysi

    Exhaust issues

    New issue! Found an exhaust that fits but now it’s stuck in way of the mudflap. (Had to remove it) any ideas how to fix this?
  5. tobysi

    Exhaust issues

    Thank you, Fairly certain I’ve found the right one No: NRC8889 Let’s see if it fits!
  6. tobysi

    Exhaust issues

    200tdi from a disco, 1985
  7. tobysi

    Exhaust issues

    Hi, Annoyingly I’ve somehow managed to burn off the end of my muffler and am in need of a new exhaust for my 90. However, I’m struggling to find the right one. Here is a picture of the existing one, any help would be much appreciated. Thanks
  8. tobysi

    Gearbox and clutch issues...

    Cheers guys, that worked brilliantly. Saved me a lot of cash!
  9. tobysi

    Gearbox and clutch issues...

    Thanks James is that access under the car - what should I do when found
  10. tobysi

    Gearbox and clutch issues...

    It’s a LT77 reverse upper left, all other gears work fine.
  11. tobysi

    Gearbox and clutch issues...

    Hi all, I have a 1985 converted 200tdi Defender with a Dico transfer box. We are having some issues with it first being reverse. We can select reverse but it won’t stay in, ran it down to the local specialist who told us they thought the synchros were out of alignment and as a result it needed...
  12. tobysi

    1985 90

    Yes, cheers
  13. tobysi

    1985 90

    Yes, that looks right. Thanks !
  14. tobysi

    1985 90

    Thanks!
Back
Top