Recent content by timtheenchanteruk

Ya think... :D I do use me welder for other bits and bobs too, especially in this lockdown thingy. good for a tinker, and practice :) and remembering how nice welding new metal is, not a rusty **** chassis

I've used pub gas for ages, but I've moved, and cant get a supply any more. I have 2 bottles, empty, does anyone know anywhere round Leeds/Bradford/Wakefeild/Cas where I could get them filled, cos ill be damned if im paying £13 a pop for the little disposables.

Ideally I'd love to whack a new chassis on, but funds wont allow. Every other year I need to do some chassis welding, a few years ago redid the whole back chassis from the rear wheels backwards. 2 years later needed repair further forward, round the trailing arm mounts. Now I've got bit needing...

Its not often I see a price difference luke that either...

Thats the blighter... Lmfao at the "genuine" price tho... Cheers

That'll explain it then. Wasnt impressed, wasted a bag o sand clearing it up... :(

Now, I was under the impression there was a thermostat for the oil cooler in the fuel filter housing. Upon this presumption, I decided to try starting the fender with the rad removed (and thus oil lines disconnected) after refitting the cam belt. She started, lumpily, so I got out to have a...

Fixed it. FIP changed, re timed, new pushrods, new cambelt, and she runs. Very lumpy, but she runs, currently putting it down to valve clearances being way out, not done em yet, valve caps are that worn, ive ordered a new set, so I'll set em after that. If its still lumps, i must have got the...

What it says... Anyone know the part number for a 300tdi injector pump stud? google fu has failed... :(

got my 110 custom stainlesse side exit, looks and sounds ace :) was a nice £400, but they took their time on it, it sits higher than the standard zorst, and was a full system right form the cat. Make sure whatever you get has a flexi in the downpipe, ot it will suffer fatigue and fail prematurly.

link would help...http://www.ebay.co.uk/usr/budget-radiators?_trksid=p2047675.l2559

Ive used this guy for a few different motors over the years, and a few mates (and me) have fitted them to our fenders, never had a problem.

wouldnt surprise me, the diff crown wheel alone is the best part of 30kgs.

Wait till it starts slipping, and change before complete failure if poss, theres no way to guess when or how long it would last. anyhoo, 22mm copper pipe also works well for an alignment tool. ive done mine twice box out, only because it ended up a relativly short period between changes, and I...

would make it quieter, surely, sharing the gas between 2 pipes, would make it louder on the side sans paipe atm, but quieter on tother side?