Recent content by tim wilki
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
T
Hi All just a quick question i want to take the head off of my 2.25l 1985 S3 to paint,check values ect the question is do i have to replace the head bolts or can i reuse the old ones ? she has only done 37000 miles so maybe its never been off
Many thanks for any help
-
T
Hi ok will have the tracking check but on the front is there a camber adjustment or is it just toe in and out
Thank
Tim
-
T
hi all i know this has probably been asked before but here we go anyway
had a new set of tyres fitted last winter i,ve noticed that my front left inside has a lot more wear than the front right which has even wear
also rear left inside has more wear than than the right rear which is even (rear...
-
T
Hi i do believe in what you are telling me of course
just been out this morning started her up and up it came pressed the ORM and up again now i am confused
thanks
-
T
Hi thanks will go and have a look
did you have a pressure issue as well?
thanks
-
T
hi yes to the question both
btw when you push the ORM do you get the bongs a flashing warning
-
T
Hi if i push it no difference
just a thought if the piston seal has warn then maybe i get some pressure but as the pressure builds maybe the piston seal/ring is not good enough what do you think???
but would that explain the early cut out ?
-
T
will check again in morning to dark now but looked ok from what i could see
what i meant is the air bags get hard but will not lift from down position
-
T
Hi i have a simple code reader obd2 will this just plug in or need a special cable as i cant seem to locate it?
-
T
Hi did try the relay with a 30amp one but still the same
-
T
Hi i did have a problem with the bags but changed and all working fine there are no warning lights i have not plugged in but i only have a simple tester but will try
-
T
Hi was ok the morning at height the wife took it and came back down will not rise but the bags get hard but with no lift?
is the cut out on the compressor and can it be replaced ?
thanks
-
T
Hi All
having a problem with my air compressor for suspension
It run for about 3 to 15 second then cuts out will not lift
Your help is needed pls
Tim