Recent content by Tim Baldwin
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
T
Sir you are a gentleman she’s up and running a treat thanks to your advice
-
T
Aha then I think it’s ok so I will check the idle valve first - ant advice on that please
And thanks so much
-
T
All was fine prior to strip down
-
T
The pipe is blocked so not passing air where does it plug into and how do I get to it? Thanks
-
T
Don’t want to remove intakes again to find the pipe is not kinked after all.
-
T
I replaced the thermostat and pipes and engine runs fine except no cold idle. When I remove that pipe cold idle is fine but you can hear vacuum taking air in. I may have kinked the pipe but if it’s not meant to pass air it can’t be that. I vacuum tested that pipe and it holds vacuum as though...
-
T
Hi thanks for your help it the thin pipe leading to 10 o’clock in the picture
-
T
Please can somebody tell me for certain where the angled vac pipe goes to and what it does? Thanks
-
T
Recently replaced thermostat and fault started after this. If you pull the small angled vac Pipe off the intake behind throttle body it runs fine. What does the pipe lead to and what does it do please