Recent content by tilloumark
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
T
Thanks - sorted now - anyone know where I can get a cheap version of the injector return pipes from - I live in France.
-
T
Thanks guys - will follow your advice:)
-
T
When I press the fob I get nothing - how do you re-syncronize them?
-
T
My remotes just stopped working the other day. They won't lock or unlock the vehicle. Have swapped for new batteries and still no joy - any ideas?
-
T
Had a problem with my immobiliser/alarm on my disco 300tdi. Solved now using the 4 digit code bypass. The problem is when I come to lock the door with the key, the immobiliser/alarm re-initiates! and I have to go through the bypass procedure again - how do I bypass it and keep it bypassed...
-
T
I don't have the handbook - it didn't come with the car - any help appreciated - got to go to work tomorrow and can't get my car to work.
-
T
I have a 300TDI Disco '97. This morning came to drive it and the central locking won't work. Used the key and the alarm went off! Any tips? Can I isolate the alarm system in any way? Worked absolutely fine yesterday and for the last 12 months since I bought it.
-
T
Are they the return pipes from the injectors?
-
T
Got a '97 disco 300. It takes about 15-20 turns for it to fire up initially with a lot of black/grey smoke. If you stop it and re-start within 2 hours everything is fine but beyond 2 hours then it takes ages to start again - any ideas?
-
T
Yes it's a 300 TDI - will the solenoid need replacing or will the wire be loose or dirty?
-
T
Me being stupid - what do I look for and how do I solve it?
-
T
Got a 97 Disco that has started playing up in the last week.
It began by the engine not stopping when the key was turned off - had to stall it - then all OK for a few days.
Now it struggles starting - about 15 turns before it fires up when cold - when it is warm everything is OK. Still got...
-
T
The front windows work fine it's just the rear.
-
T
I have used good replacements but it keeps blowing. I have tried the repairing solder trick but it doesn't work. Anyone any ideas on bypassing the ECU?