Recent content by swac

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    P38A Cabin Air Filter Housing.

    Thanks for your efforts but I know the part you are referring to and that's not the part I mean, I've removed that. Once the part you are referring to is removed you will see the plastic housing in which the pollen filter sits, and in the bottom of it are 8 off M5 x20 panhead screws which secure...
  2. S

    P38A Cabin Air Filter Housing.

    I'm talking about the metal housing in which the pollen filter sits, you have to remove the scuttle to access it.
  3. S

    P38A Cabin Air Filter Housing.

    I beg to differ, having tried several.
  4. S

    P38A Cabin Air Filter Housing.

    Yes, the 8 screws that hold each of the pollen filter housings to the body. They are not regular screws as they have a plain unthreaded part at the end of the screw for location purposes.
  5. S

    P38A Cabin Air Filter Housing.

    Does anybody know where I can get the screws from that hold the cabin air filter box housing to the body? I think that they are M5 x 20 Pan head extended tip (dog point) screws. I'm not going to put the old ones back as some were very difficult to get out and rusty.
  6. S

    P38A 2002 4.0 litre V8. No front drive shaft.

    Thanks for the swift responses gentlemen. It is much appreciated.
  7. S

    P38A 2002 4.0 litre V8. No front drive shaft.

    I have removed the front drive shaft as the bearings were in very poor condition and need replacement. My question is can I still drive it without a front drive shaft or will it cause problems?
  8. S

    P38A 2002 4.0 V8. Vibration.

    Apologies and thanks to those who have already replied but I realised that my original post did not give any of you reading it enough information to help me so I've added year and engine. I have a new problem which started to manifest itself about a week ago but seems to be getting steadily...
  9. S

    P38A Vibration.

    You may be on to something there. I think the wear may have been on the outside.
  10. S

    P38A Vibration.

    Thanks for the reply. I've just had a quick look but I can't see a crank vibration damper. My car is a V8 petrol version should it have one?
  11. S

    P38A Vibration.

    I have a new problem which started to manifest itself about a week ago but seems to be getting steadily worse. I had a couple of new tyres fitted on the front about a month ago and the tracking adjusted as the old tyres had worn unevenly, I can't remember if it was the outside or inside edge...
  12. S

    P38A Water Ingress.

    Do you have any tips for unblocking them?
  13. S

    P38A Water Ingress.

    Yes, sorry I missed that important piece of information.
Back
Top