Stone56's latest activity

Ooops sorry tis the D1, it was getting that crusty looking way so yup I poked holes in it lol tbh it would have passed another mot but whats the point in putting it off, now I dont need to worry about it. :)

Phew it is dark now, so I can now put the hens to bed and maybe go to bed myself, not with them, obvs!!!! 🤣 🤣 🤣

You know what? I have completely lost the plot on this. Which vehicle are you talking about now, plese, pretty please, sugar on the top?? ;);)

Finished the welding on the inner wings, was a bit of a mission. I found a bit which was missed/butchered previously & was letting water in. Ive no idea why they didnt weld it but decided to fill it with silicone. :mad: that was the easiest part...

Yep, so you remove the oxidisation, but what is oxydised is the clear coat, or paint. You remove tiny amounts each time you do it but eventually it is possible to be killing it with kindness. If you don't have oxydisation, use simple wax type polish.

1949 S1 knock on metal type Early disco Both are knock on,not measured or removed to check further. They look the same size(my theory is wheel stubs are all the same design/size for most years) unless you got HD with bigger shafts

Then we'll have to name it Noah's Ark. Better suggestions welcome :D

It doesn’t appear to be floating! 🤔

I done some polishing on my floating caravan.........& I have a galaxy A16 stupid phone.

It's a bungalow and I always leave the living room stat fully open because that's where the controller is. I keep hall, bedroom and bathroom at a medium heat and living room an kitchen nice and cosy. All pipes go into the attic and drop down into...

Orizontal bits get hit wiv more sunshine. So more potentual sun damage.

Gardener.

Just spray it with water, if it looks fine then, it's the lacquer/clear coat.

W has just spent time polishing up some dirty silver jewellery that she got from an auction. Just discovered that a kilt pin she bought for £40 is for sale on Etsy for €138.7! Have to admit she is very good at this!

Yerbut what @Stone56 was getting at, even the lowest forms of life dunt want a Freelander :p

On my Disco 2, the laquer coat has peeled off massively on the roof. Where I doubt anyone has put any polish on, far too hard to get to. 😜

Funny. Especially when posted in the section that lists freds such as: Rear cross memba rust. Wots the best replacement shassy supplier. MOT man poked oles in me shassy. Sellin the heap as it wunt pass the next MOT and eye int got time ferra rebuild.

Does yer pinch the seeds offit before the burds get them, to grow more sun flours?

My 15mm pipe bender doesn't do tight bends, only similar to the one in the picture that's why I thought 10mm pipe would be better, My brake pipe bender does 10mm so pipe should be hidden under the radiator, I'll paint the exposed pipe to match...

Magpies? We have some squizzles near work that are plagued by maggies sometimes ...

Not sure what that valve is there for, temp fitting? while work being done? Personally I would just take it back to the trunking and go from there neatly with 15mm. but then I have a nice pipe bender that could get from the trunking to the rad...

Searched all of the house, all garments, both cars and a lot of outside. Still couldn't find the key to the polytunnel. So had to take the padlock off with bolt cutters. As everyone knows, we'll find it by buying a new padlock. Cool here...

I finished the plastering because it wasn't straight Plumber and joiner fitted skirting and radiator on same morning working together I've since replaced the architrave and now replacing skirting and tidying plumbing up

I'm well cheers. I just don't post very often but I do pop by fairly regularly 😀

Plasterer or plumber?

This is the wonderfull job workmen did after plastering the walls 🤔

Your right I spose I don't like compression joints on show so rather than solder a bend in I was thinking I can get a tighter bend in the micropipe so it looks neater. I also have a part roll of micro pipe in the shed and the rad needs a new...

Saw that on tinter web, but "er indoors wouldn't let me go :rolleyes:

Have you got day tickets to Swingerfest?

Tidied part of me garage this morning to a (very) basic standard and binned some junk. Emptied my box of assorted drill bits yesterday and binned most of them (why I kept knackered bits I don't know). Got under me tratter bonnet this morning and...