Recent content by Steve Bond

All good runs well and tows a trailer with horses. Now got to sort poor MPG currently 22MPG it's an auto. Going to remove EGR and a high flow air filter first. Any other solutions? would a remap help MPG, not really interested in performance.

Separate issue, nanocom also got heated front screen and fog lights working!! Going to check autobox next see if xyz has any issues as l have heard this might cause cutting out/poor running??

Got it going again, fully charged battery. At least 8 purge cycles, sprayed brake cleaner in inlet , that did the trick. So again it's very likely the fuel gauge is over reporting. My son ran my nanocom while driving, got a fault,,turbo over boost, turns out actuator spring faulty, and previous...

Yes it's noisy when ignition is turned on, l have completed at least 3 purge sequences, pump was giving 4 bar when tested.

Back to square 1, she drove car to school. Low fuel just came and wouldn't restart.Put 20l diesel in, ran purge twice, nothing. While it was running it did falter going up hills??? I now have a nonocom so will try that???

Finally got it going,put battery on slow charge all weekend. Was about to change starter motor,thought I'd do one more purge and blow me it started- with original ECU.In summary im going to say it was air in system from running out and constant purging flattened battery, but I'm not 100%!! As l...

Thanks very informative, I'm hoping starter will solve the problem, this looks a bit complicated!! But if I have to give it a go I'm up for it. Thanks

Thanks Si-- have ordered a repair kit, and will tackle it at weekend, will re try with old ECU, hopefully it will be successful?? Separate issue, is there any way to check if power is going to injectors without a nanocom??

The old ECU was very oily, so l thought it might be knackered, l took the cover off, no oil, but it didn't start so thought to change it ? At the moment neither work. Just trying a few options. Given what is good, ECU is a possibility.

I thought I'd have to re program the ECU thanks, l 'll have to tow it to an auto electrician. The battery is good and doesn't drop below 10.5 . Unfortunately it's an auto. Think I'll get it a nanocom first. Thanks all. I'll let you know what it actually was.

Forgot to add got 4 bar at fuel temp sensor

Hi All My daughters disco suddenly would not start,it was low on fuel-warning light flashing, so I have pit in 2 gallons of fuel, changed filter, changed injector loom, changed CSP sensor and checked continuity to ecu,cleaned oil from red plug,changed ECU for same part no [ did not do anything...

Hi Disco 1 BFG It is aSoftdash I have read a post about the spyder box, so will look into it for the moment I am still trying to see why although I get 12v to the fuel solenoid it doesn't energise it only a direct link does?? Thanks

Thanks, moved on a bit now, ive found fuse F3 blown which amongst other things powers the glow plug relay,replaced fuse several times blew each time. Checked lead from this fuse to the relay got good connection. Put separate lead from battery to relay still didn't work. Then heard a small beep...

Married 3 kids eldest boy owns lightweight